MANUFACTURING AUTOMOTIVE MANUFACTURING
AM production line installed at BMW
FRONTIERS PHOTONICS
Separated components are transported in small load carriers
B
MW Group will use additive manufacturing to produce 60,000 car components annually.
A digitally connected, fully automated 3D printing manufacturing line has been set up and prepared for automotive standard production at the car maker’s Additive Manufacturing Campus in Oberschleißheim, Germany. An additional line has been established at GKN Powder Metallurgy’s site in Bonn.
The achievement is the result of a three-
year (2019-2022) undertaking by BMW Group and its partners within the IDAM (Industrialisation and Digitalisation of Additive Manufacturing) project, which aimed to revolutionise metal 3D printing in standard automotive production. The new lines will use laser powder bed fusion (LPBF) technology to produce around 50,000 components per year in common
part production, as well as more than 10,000 individual and new parts. Using LPBF means certain tools are no longer required and new design possibilities can be realised – which greatly increases flexibility and cost-effectiveness. Fully automated driverless transport
systems are used to carry the 3D printers’ mobile build chambers and metal powder between modules in the two new IDAM production lines. Manufactured components are then transported to specially designed post processing stations, which are also fully automated. The machines are orchestrated by a central control unit that consolidates all production data from individual line modules to ensure maximum productivity and quality. Quality assurance of the finished parts
takes place in-line, during the laser melting process, using sensors. This includes
“This means process deviations can already be identified during production and component quality evaluated”
checking emissions from the molten pool with a CMOS camera and pyrometer. AI algorithms are used to correlate the data collected with actual component quality. This means process deviations can already be identified during production and component quality evaluated. Other partners in the project included
Aconity, BMW Group, Concept Reply GmbH, Fraunhofer ILT, GKN Powder Metallurgy, Intec, Kinexon Industries, Myrenne, RWTH Aachen’s Chair for Digital Additive Production DAP, Technical University of Munich’s Chair of Metal Forming and Casting, Schmitz Spezialmaschinenbau, and Volkmann. l
Photonics Frontiers 2023 37
BMW Group
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58
