New electrode could make OLEDs 20% brighter


A


new electrode that could free up 20 per cent more light from organic light-emitting diodes has been


developed at the University of Michigan. The electrode, a 5nm-thick layer of


silver and copper, reportedly outperforms conventional indium tin oxide without adding cost. The approach prevents light from being trapped in the light-emitting part of an OLED, enabling OLEDs to maintain brightness while using less power. Also, the electrode is easy to fit into existing processes for making OLED displays and light fixtures. The research, which could help extend


the battery life of smartphones and laptops, or make next-gen televisions and displays much more energy efficient, was published in Science Advances. Around 80 per cent of the light produced


by an OLED gets trapped inside the device. It does this due to waveguiding, where light rays that don’t come out of the device at an angle close to perpendicular, are reflected back and guided sideways through it. A good portion of the lost light is simply


trapped between the two electrodes on either side of the light emitter. One of the biggest offenders is the transparent electrode that stands between the light- emitting material and the glass, typically made of indium tin oxide (ITO). In a lab


‘Some researchers were able to free up about 34 per cent of the light by using unconventional materials’


device, you can see trapped light shooting out the sides, rather than travelling through to the viewer. ‘Untreated, it is the strongest


waveguiding layer in the OLED,’ Professor Jay Guo, corresponding author of the study, said. ‘We want to address the root cause of the problem.’ By swapping out the ITO for a layer


of silver 5nm thick, deposited on a seed layer of copper, Guo’s team maintained the electrode function, while eliminating the waveguiding problem in the OLED layers. ‘Industry may be able to liberate more


than 40 per cent of the light, in part by trading the conventional indium tin oxide electrodes for our nanoscale layer of transparent silver,’ said Changyeong Jeong, first author and a PhD candidate in electrical and computer engineering.


www.electrooptics.com | @electrooptics FEEL THE POWER


Enhanced high-power single-mode interconnects up to 16 watts


 Available products: E-2000®


and DMI (upon request)


An ultrathin Ag film-based OLED inside Professor Jay Guo’s lab


This benefit is tricky to see, though, in a


relatively simple lab device. Even though light is no longer guided in the OLED stack, that freed-up light can still be reflected from the glass. In industry, engineers have ways of reducing that reflection – creating bumps on the glass surface, or adding grid patterns or particles that will scatter the light throughout the glass. ‘Some researchers were able to free up about 34 per cent of the light by using unconventional materials with special emission directions or patterning structures,’ Jeong said. To prove they had eliminated the


waveguiding in the light emitter, Guo’s team had to stop the light trapping by the glass, too. They did this with an experimental set-up, using a liquid that had the same index of refraction as glass, so-called index- matching fluid – an oil in this case. That ‘index-matching’ prevents the reflection that happens at the boundary between high- index glass and low-index air. They could then look at the experimental


set-up from the side, and see whether any light was coming sideways. They found the edge of the light-emitting layer was almost completely dark. In turn, the light coming through the glass was 20 per cent brighter. The research was funded by Zenithnano


Technology, a company that Guo co- founded to commercialise his lab’s inventions of transparent, flexible metal electrodes for displays and touchscreens. The University of Michigan has filed for patent protection.


Contact us today to discuss your application!


 Single-mode  PC 0° termination  Up to 16 W optical power  High Return Loss (RL)  Low Insertion Loss (IL)  Protective shutter


www.diamond-fo.com


DIAMOND SA | via dei Patrizi 5 CH-6616 Losone | Tel. +41 58 307 45 45 info@diamond-fo.com


University of Michigan


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50