// ARTICLE
Designing MMC buildings for their second life
Modern methods of construction are oſten associated with what happens before a building reaches site: components are manufactured in controlled conditions, transported efficiently and assembled quickly. But what happens when the building reaches the end of its first life?
I
f construction is to use fewer virgin resources and reduce waste, it is not enough to make buildings more efficient to manufacture. The industry also needs to consider whether components can be repaired, removed, reused and recovered when a building is altered or eventually dismantled.
For MMC, that could be a significant opportunity. Built to come apart
Design for disassembly means considering how a building can be taken apart, rather than assuming demolition will be the final step. Components should, where practical, be accessible and removable without destroying the surrounding structure. The UK Green Building Council includes design for assembly, disassembly and recoverability among its circular- economy principles for buildings. It also identifies standardisation and modular elements as ways of making components easier to reuse.
That fits naturally with some characteristics of MMC. Manufactured components are oſten standardised, repeatable and designed around defined interfaces. Those same qualities could make future replacement and recovery easier if they are deliberately incorporated into the design.
But standardisation alone is not enough. The connection matters
A component can be reusable in theory and impossible to recover in practice. Consider the difference between a component that is mechanically fixed and one that is permanently bonded, sealed or embedded. Both may perform perfectly during the building’s first life. Only one may be straightforward to remove without damaging it.
The same applies to access. If a service module can only be reached by destroying surrounding finishes, its theoretical replaceability is of limited
32 Autumn 2026 M41
value. This is where MMC could move beyond the idea of simply manufacturing buildings faster. Designers can decide how components connect, where interfaces are located and how future maintenance or replacement will happen.
The end-of-life question
The European Commission’s Joint Research Centre is examining circular, modular and offsite construction methods, including design for deconstruction. Its work highlights the potential for standardised prefabricated elements to be assembled, disassembled, replaced and reused. The principle matters because waste generated at the end of a building’s life contains both materials and the emissions associated with producing them. MMC is oſten promoted as a way of reducing waste during manufacture. Designing for disassembly asks a second question: can the industry reduce waste when the manufactured building eventually comes apart? That is a much longer view of sustainability.
Making future change possible
Nobody can predict exactly how a building will be used for the next 50 years. A future owner may want a different layout, regulations may change, and services may be replaced by technologies that do not exist today. Design for disassembly therefore works best when it creates options rather than trying to predict every future requirement.
Accessible connections, replaceable components, standardised interfaces and good information can give future owners more choices without requiring today’s designers to know exactly what those choices will be.
The commercial opportunity
The strongest argument for designing for disassembly may ultimately be commercial as well as environmental.
If a component can be removed without destroying it, it may retain a resale, refurbishment or recycling value. If it is difficult to identify or remove, that value can disappear. Manufacturers could potentially develop take-back schemes, refurbishment services or component leasing models around products designed for repeated use.
Those models require demand, logistics, storage, quality assurance and reliable information. But MMC’s manufacturing basis may make the idea easier to explore than in a construction model based almost entirely on one-off site fabrication.
Starting small
The industry does not need to wait until every building can be completely dismantled. The more realistic opportunity is to identify where manufactured components can be made more accessible, replaceable and recoverable, then build those principles into specifications and procurement. That could begin with straightforward decisions: mechanical rather than destructive connections where appropriate; standardised interfaces; accessible service zones; documented component information; and design reviews that consider removal as well as installation.
The same manufacturing mindset that makes MMC attractive today could help solve a problem much further down the line. If components are designed as products rather than disposable parts of a one-off building, the factory can become the beginning of a longer lifecycle rather than the start of a journey towards eventual demolition.
For an industry trying to reduce waste and make better use of resources, that may be one of MMC’s most interesting opportunities today.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44