INDOOR AIR QUALITY


Wall diffuser for rooms with or without suspended ceilings


The portfolio of wall diffusers available from TROX now includes two new models – CHM and CHS – designed to provide additional aesthetic and acoustic advantages in rooms with and without suspended ceilings. The new wall diffusers can be used in a variety of ways – whether for supply air, extract air or a combination of supply and extract air. The integrated sound insulation of the wall elements effectively reduces sound transmission via the duct system or through the wall. In new buildings and renovations which focus on the technical refurbishing and therefore the installation of suspended ceilings in hallways, the wall diffusers CHM and CHS offer technical as well as visually attractive solutions. When used in combination with the TROX CFE and CFS types of slot


diffusers for ceiling installation, it is possible to create variable packages meeting the specific requirements of almost any application. The CHM model features an optional volume flow limiter accessible


from the room side, while the CHS unit has adjustable air control blades and an optional splitter for improved acoustic performance. Both models are easy to install and available in a range of designs and


colours to harmonise with the interior décor. ■ www.troxuk.co.uk


Fresh air unit boosts efficiency and air quality The Fresh Large EVO by CLIVET is a full fresh air unit with advanced features that simplify air conditioning systems and enhance energy efficiency. It uses R32 refrigerant with low global warming potential and high thermal exchange, and employs active thermodynamic recovery technology to cover ventilation loads and also contribute to meeting a building's heating needs. The unit is equipped with full inverter technology for optimised performance at part loads and provides maximum filtration efficiency with iFD electronic filters for high air quality. The Fresh Large EVO also prevents


management. Designed for easy installation and system integration, it is suitable for a wide range of applications, including schools, offices, small retail


contamination between exhaust and intake air flows, and offers smart free cooling and indoor air quality


Tackling overheating in


domestic applications Designed to provide cooling and enhanced air filtration, TITON ‘s HRV Cool Plus seamlessly integrates into heat recovery ventilation (MVHR) systems, delivering pre-cooled, filtered fresh air to create a comfortable indoor environment, even in warmer conditions. With a cooling capacity of up to 3.3kW,


the compact HRV Cool Plus ensures optimal performance even in demanding situations. The system offers flexibility with wall or floor mounting options to suit


outlets, restaurants and banks. ■ www.clivetgroup.co.uk


various installation requirements. Featuring a fully sealed refrigerant heat pump, the HRV Cool Plus requires minimal maintenance, ensuring reliable operation. Developed in response to increasing


overheating issues, Titon’s solution addresses the Approved Document O (ADO) guidelines, which advise the use of mechanical cooling where sufficient heat cannot be removed through ventilation alone. Titon also provides a CIBSE- accredited CPD course on Part O and overheating to support knowledge and


solutions for this growing challenge. ■ www.titon.com


30


EIBI | JUNE 2024


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36