NEW PRODUCTS COMPRESSED AIR
Compact approach to compressed air ENERGY STORAGE SYSTEM Utility scale storage platform
Elementa Electra is an integrated battery-to-grid energy storage system from TRINA STORAGE for utility-scale renewable and storage applications. The solution is AC-coupled, combining the battery system with an AC-side unit that brings together power conversion and medium-voltage step-up functions. This arrangement supports
coordinated performance between DC and AC subsystems and simplifies grid connection. Drawing on Trina Storage’s in-house cell development, system integration and local engineering capability, the platform pairs a long- duration battery cabinet with an integrated AC-side power conversion unit to deliver high-energy density, long lifecycle performance and grid-forming
functionality. The system incorporates a control
architecture intended to support operational stability, with fault self- diagnosis, tiered fault protection and islanding detection for use under varying grid conditions. Trina Storage supplies factory-tested and pre- commissioned units to reduce on-site work, with a layout designed to minimise land use and shorten commissioning schedules. The company provides project
support from consultation and design through to installation, operation and maintenance, supported by an AI-based monitoring system for continuous risk
warning. ■
www.trinasolar.com
The Elite series from CHAMPION is a plug-and-play compressed air station designed to reduce installation time and provide a complete air system in a single packaged unit. Aimed at garages, repair shops and small industrial facilities, the station is intended for sites where floor area is limited and a dependable compressed air supply is required. Unlike conventional arrangements that rely on separate downstream components, the Elite series integrates all necessary equipment into one unit, reducing the footprint by up to 30% and arriving fully tested for air leaks so that users can begin operation once the system is connected. The range includes two models, the
Elite 7 and Elite 11, fitted with 7.5kW or 11kW IE3 motors. Each incorporates a 10-bar rotary screw compressor mounted on a 270-litre horizontal tank, together with a refrigerated dryer, filtration package, automatic condensate drain and oil/water separator. The C-Pro-2 electronic controller provides access to key operating parameters such as pressure, flow and temperature.
The package includes a CHR Series
refrigerated dryer with its own controller and power supply, a multi-stage oil/water separator, CHF filtration options for particulate and oil aerosol removal, and a robust condensate drain with stainless
steel moving components. ■
www.championairtech.com
WATER PURIFICATION
Effective water purification solution designed for humdifiers
The CONDAIR RO�E is a reverse osmosis water purifier designed for use alongside humidifiers. Its primary function is to remove minerals from the supply water before it reaches the humidifier, which reduces the amount of limescale left behind when water is boiled, evaporated or sprayed into the air. As limescale is the main service requirement for any humidifier, lowering the mineral content helps decrease maintenance and supports steadier operation. In steam humidifiers, the Condair RO-E
also improves humidity control, as the boiling chamber does not need dilution cycles to manage mineral levels. Without these cycles, water temperature and steam
EIBI | JANUARY 2026
output remain more consistent. The range is designed to deliver water with mineral levels suited to the type of humidifier. Steam units typically need water that is around 95–98% mineral-free, while the Condair RO-E+ model for spray humidifiers provides water that is about 99% mineral- free to support hygienic operation and reduce the risk of nozzle blockages. An optional touch-screen controller
can be mounted on the unit or remotely, offering access to operation and history. Outputs run from 40 to 300 litres per hour, with internal or external storage vessels and recovery rates of 50% for hard water
and 70% for soft water. ■
www.condair.co.uk
HIGH-PRESSURE STEAM BOILERS
Meeting rising needs for industrial steam generation
BABCOCK WANSON has expanded its offering to include large high- pressure firetube boilers up to 50 barg and 70 t/h, watertube boilers up to 90 barg and 150 t/h, and heat recovery steam generators. This extension means the company can now supply industrial boiler solutions ranging from compact coil-type steam generators to large, high-output watertube systems. The development follows the integration of German manufacturer VKK Standardkessel into the wider
group, allowing the full VKK range to be supplied in the UK with local service and engineering support. The combined portfolio covers a wide
range of industrial energy requirements, including single and double flame watertube boilers, hot water boilers, high-pressure steam generators with or without superheaters, and HRSGs for combined heat and power uses. The Condor range, which combines
watertube and firetube technology, provides high-pressure, low emissions and superheated steam in a compact design. Capacities run from 2 to 70 tonnes of steam per hour, with pressures up to 38 bar and temperatures up to 450°C, while hot water units can reach 50 MW and 30 bar. Electrical and hybrid versions are also
available. ■
www.babcock-wanson.com
33
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36