THE ENERGY SAVING AWARDS 2025 PUBLIC SECTOR PROJECT OF THE YEAR Sponsored by
Winner: NIBE Energy Systems for Scotland’s National Retrofi t Centre
system is controlled by a NIBE SMO S40 controller, which enables the three products to seamlessly communicate with each other. This confi guration is engineered
for maximum effi ciency: the PV-T array pre-heats the ground loop, boosting the GSHP’s seasonal COP and sharply reducing electrical input. By cascading the GSHP and ASHP, the system runs each unit at its most effi cient operating point, avoiding the steep energy penalties typical of peak-load fossil systems. NIBE’s advanced controls
Scotland’s National Retrofi t Centre showcases a fully decarbonised, high-effi ciency heating and hot water system delivered by NIBE ENERGY SYSTEMS, designed specifi cally to maximise energy savings while replacing the building’s outdated, energy- intensive fossil-fuel plant. The objective was to dramatically cut operational energy use through renewable heat extraction, smart optimisation, and ultra-effi cient system integration – proving that even complex commercial buildings can transition to low-energy, low- carbon operation. A high-capacity NIBE F1355-
28kW ground source heat pump was installed, which is cascaded
with a NIBE S2125-12 air source heat pump to provide additional output during peak demand. The GSHP sources its heat from 42 roof-mounted photovoltaic-thermal (PV-T) panels, which generate both electricity and heat, an ideal combination for a GSHP. The entire
and myUplink optimisation further reduce consumption by constantly adjusting fl ow temperatures, balancing loads, and preventing unnecessary cycling. Early monitoring shows substantial reductions in delivered energy compared to the legacy system, achieved entirely through renewable heat capture and precision control. The result is a fully electrifi ed installation that delivers high comfort at a fraction of the energy previously required, while providing real-time performance data that demonstrates and continually improves effi ciency gains.
● JUDGE’S COMMENT: “A retrofi t case study of a complex site providing a solution that generates both electricity and heat.”
Highly commended: EvoEnergy for solar PV installation at Birmingham Airport
EVOENERGY delivered a landmark 6.89 MWp airside solar PV installation at Birmingham Airport, designed to cut reliance on grid electricity and support the airport’s Net Zero 2033 target. As the UK’s largest ground-mounted solar PV system within a live aviation environment, it generates over 5,010,570 kWh of renewable electricity annually – enough to meet up to 20% of the airport’s total energy demand. This reduces both grid dependence and carbon emissions by over 1,037 tonnes CO₂e per year, while providing predictable energy cost savings. The project’s distinctiveness lies in its integration within a live
airside environment, overcoming stringent Civil Aviation Authority safeguarding rules via a bespoke glint and glare assessment. A custom remote interface dynamically manages grid export limits, optimising on-site energy use. Advanced
mounting solutions and digital project platforms ensured effi ciency and reliability during installation. Continuous real-time monitoring verifi es the system’s
performance, allowing immediate intervention if output falls below forecast. By integrating this large-scale renewable system directly into its operations, Birmingham Airport has achieved a permanent reduction in its baseline energy use from non-renewable sources, placing it at the forefront of sustainable aviation infrastructure in the UK.
LIGHTING PRODUCT OF THE YEAR Winner: Tridonic for the Multichannel OTD Driver
The TRIDONIC Multichannel OTD Driver represents a step-change in energy-effi cient outdoor lighting. Designed specifi cally for street and urban applications, it enables precise, adaptive lighting that balances safety, effi ciency and environmental protection. Unlike conventional single- channel drivers, the Multichannel OTD allows fl exible control of multiple LED channels, making it possible to dynamically adjust light colour temperature (CCT). Cooler light can be used in early evening when visibility and safety are priorities, while warmer tones can be applied later at night to reduce blue light emissions that disturb wildlife and people. This adaptability ensures that light is delivered only in the quantity and quality required, reducing unnecessary energy use. Advanced dimming schedules
and sensor integration further optimise energy consumption. Presence and daylight sensors ensure light is delivered only when and where needed, automatically reducing output in empty or naturally lit areas. The driver’s high conversion effi ciency – up to 95% at full load – minimises wasted energy, while standby consumption
14
Highly commended: Signify for Puzzle by Signify MyCreation
is exceptionally low, typically 0.16- 0.3 W. Robust electronics maintain performance under harsh outdoor conditions, reducing losses and prolonging lifespan. Fine-tuned control via DALI or other interfaces allows municipalities to match output precisely to each environment, avoiding over-lighting and
maximising savings. With up to 100,000 operating hours and minimal maintenance requirements, lifecycle energy use and costs are signifi cantly lower than with competing drivers. By combining high effi ciency,
intelligent dimming, multichannel control and sensor-based adaptation, the Tridonic Multichannel OTD delivers substantial reductions in energy use while improving safety, minimising light pollution and supporting sustainable urban lighting infrastructure.
● JUDGE’S COMMENT: “Complete control of outdoor lighting with clear benefi ts to conserving energy consumption.”
Designed to maximise illumination while minimising energy use, Puzzle by SIGNIFY MYCREATION achieves up to 157 lumens per watt, surpassing typical offi ce-compliant LED luminaires, which operate at 130 to 140 lumens per watt. The product’s energy-saving
capabilities are enhanced by smart-system integration, including DALI Interact Dimming, Wireless Interact Dimming, and sensor-ready functionality. These features allow adaptive control of light levels, occupancy- based adjustments, and daylight harvesting, ensuring illumination is only provided where and when it is needed. In practice, this reduces unnecessary electricity use and
cuts operational costs. Puzzle’s long lifespan, with lumen maintenance of 72,000 hours to L80 at 25°C, further contributes to energy savings by reducing the frequency of replacements and the associated manufacturing energy. Its modular design allows future scalability without requiring energy-intensive retrofi ts. In offi ce trials, the system has demonstrated up to 30% energy reductions compared with conventional luminaires, while maintaining optimal lighting quality. By combining high effi cacy, intelligent control and longevity, Puzzle off ers an energy-effi cient lighting solution that supports sustainable workplaces.
EIBI | JANUARY 2026
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36