HEAT PUMPS
Gas absorption – the alternative heat pump technology
In applications where an electrically powered heat pump might not represent a viable option, gas absorption heat pumps can still deliver significant carbon savings while requiring minimal infrastructure upgrades. Garry Broadbent explains more.
Garry Broadbent
www.purethermal.co.uk
Operations director Pure Thermal
C
pump applications is costly and can be difficult to obtain due to regional or local electricity supply issues, so it’s clear that a more transitional approach, rather than immediate fuel switching from gas, can really benefit some carbon reduction focused applications. Gas absorption heat pumps are
ommercial gas absorption heat pumps (GAHP) have been widely applied throughout the UK, with
hundreds of units successfully operating nationally. However, since the electrification of heat and fuel switching from gas have become the industry priority, there has been an increasing focus on electrically powered heat pumps and direct electric forms of heating. So is there still a place for gas-fuelled alternatives? As we get nearer to 2050 a
realisation has occurred. It is now clear that a need for more transitional measures to accelerate carbon reduction has become apparent. This is where the application of commercial gas absorption heat pumps has re-emerged with the potential to provide immediate carbon savings by simply reducing gas usage. These savings are achieved via heat pump technology, but without the need for increased electrical supplies. I would ask if GAHP technology has been overlooked in favour of electric heat pumps because gas is seen as something that must be removed rather than gas usage being reduced. Upgrading electrical supplies for retrofit commercial heat
EIBI | JANUARY 2026
able to provide a transitional heat pump opportunity with electrification to follow. This means that lower capital cost carbon reduction measures can be applied immediately via GAHP and long delays/costs for new electrical supplies can be avoided.
Gas reduction So, what are the benefits of gas absorption heat pumps and why should they be considered? Such heat pumps are relatively
straightforward to apply as they use the incumbent/existing gas supply and use only 1kW of electricity to generate 40kW of heat, so if we have a commercial gas heater which is more than 100% efficient, it offers an immediate reduction in gas usage when compared to boilers.
Taking the mantra of using less gas
rather than no gas, the application of GAHP can make real sense for applications that do not have cost effective or timely access to increase electrical supplies in order to install electrically powered heat pumps. A modular approach is one possibility, such as using our Robur A-Plus 40kW unit in single or parallel unit configuration. Alternatively, there is the option
to specify factory assembled skids with multiple GAHP units mounted in a single system, plus there is also the additional option to select a hybrid system with heat pumps and skid mounted externally located boilers. This option provides a complete hybrid solution by sizing the gas heat pumps to cover the maximum amount of carbon reductions and only bringing the gas boiler into play below an external temperature of say 5°C in order to provide additional capacity support. With respect to current UK demands, the application team at Pure Thermal are confident that the configuration options and case studies within both the UK and throughout
Specialist heat pump provider Pure Thermal recently relaunched the Italian-manufactured Robur Commercial Gas Absorption Heat Pump range back into the UK market as the appointed UK partner. Robur first entered the UK market with its GAHP units in 1993 and has continued to provide multiple absorption heat pumps to a variety of applications. Product and application training is an important element of the Pure Thermal package and the company provides full training for designers, specifiers and contractors that are new to the concept of GAHP. Several webinars and training sessions are planned throughout Q1 and Q2 that will demonstrate that GAHPs are simply just another type of heat pump powered by gas rather than electricity.
Europe will be able to demonstrate correct GAHP application methods to provide confidence to specifiers and designers.
It must be considered that this is
not new technology; on the contrary this is extremely well-established technology with successful application going back over the last 20 years with GAHP simply being a different type of heat pump refrigeration system to the vapour compression refrigeration system found in an electric heat pump.
How they work GAHP units utilise a burner to place heat into the refrigeration circuit unlike the electrical compressor which does the same job in a vapour compression system; however, both types utilise air source or ground/ water source renewable energy. In summary, these units use gas to generate heat using renewable source energy, be it air or water, to provide a system that will use circa 40% less gas than the incumbent boiler. Hence we have a heat pump system which is practical and easy to apply and integrate with existing gas supplies with an output temperature capability of 70°C. The present unknown situation
regarding the use of the gas in the future is still to be determined with a consultation concerning the gas transition launched in November last year. However, when considering the use of gas, it is noted that in Q4 of 2025 a significant investment of circa £150 million was placed by government into making ready certain sections of the grid to take advantage of hydrogen to a mix of 5%. Alongside this it should also be
noted that biogas is gaining more momentum as is also the case in Spain and Italy with the objective of supplying the grid with clean renewable gas. In summary, this indicates that the application of gas absorption heat pumps can be viewed as an immediate transitional carbon reducing technology for the next 15 years until remedial improvements to the electricity grid ensure that power is more readily available to apply electric heat pumps. It should also be considered that GAHP may be a technology that could be viewed as long term to operate for many years with a gas grid circulating clean gas that could be a mix with a biomethane or hydrogen base, but whichever view is taken, whether transition or long term, there is no doubt that gas absorption heat pump technology is proven and ready to be applied now for both new or retrofit applications. ■
29
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36