Column: Circuit drill
The impact of power supply voltage fluctuations on the current-limiting circuit
By Sulaiman Algharbi Alsayed, Managing Director, Smart PCB Solutions C
urrent-limiting circuits restrict the current drawn from a power supply to a predetermined level, to protect the downsteam load from excessive
current. These circuits are commonly found in many electronic systems and appliances. They have adjustable
features to cut off the output current across the load; without them, excessive current could lead to a short circuit or system failure. Current limiting circuits could
be simple or more sophisticated, to operate at wider voltage fluctuations, or with greater temperature stability, or to suit specific applications.
Nevertheless, they all function the same with different operating windows To determine how such a circuit
reacts to input voltage changes, we set up this experiment, consisting of a simple current-limiting circuit powered by 12Vdc; see Figure 1. This circuit is designed to deliver a maximum load current (through R3) of 7.3A when the R3 resistance is shorted (zero Ohm).
Figure 1: A simple current-limiting circuit with 12Vdc power supply and a maximum load current of 7.3A
Methodology To examine the circuit’s performance at various input voltages, I connected it to a variable power supply of between 1Vdc and 30Vdc. The current passing through the load was then measured. It’s worth mentioning that the maximum load current is measured by shunting the load resistance (load resistance at zero Ohms). Figure 2 shows the maximum
load current drawn from the circuit at various voltage levels. It can be seen that the load cutoff current is reversely-proportional in relation to the power supply voltage, changing at a rate of 0.13A for every 1Vdc change in voltage supply, for power supply voltages between 1.3Vdc and 3.2Vdc. The maximum load current changes by 2.8A for every 1Vdc, for supply voltages between 3.2Vdc and 30Vdc. This leads to the conclusion that
Figure 2: Maximum load current vs. power supply voltage
the selected current-limiting circuit maximum load current (cutoff current) is impacted by the power supply voltage at the point of short circuit (in the load).
10 June 2022
www.electronicsworld.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
