PACKAGING


“Good packaging should support the line, not slow it down.”


conditions wherever possible, including normal operating speeds and changeover requirements. The aim is not to over-engineer the pack.


routinely required. Their experience can help distinguish between an occasional fault and a recurring operational issue.


DESIGN FOR THE ENVIRONMENT IN WHICH THE PACK MUST PERFORM Packaging intended for an automated line should be developed and tested with that


line in mind. The design needs to account for erection, filling, closing, sealing, stacking and palletisation, not simply the dimensions of the product. That may involve checking dimensional


tolerances, crease quality, compression strength, board grade and closure design. Trials should reflect real production


It is to remove avoidable variability and ensure the specification is robust enough for the process. For factories under pressure to improve output, reduce waste and make better use of automation, packaging deserves a place in the operational review. A pack that runs reliably may not attract


much attention, but that is precisely the point. Good packaging should support the line, not slow it down.


VPK Packaging www.vpkgroup.com


FACTORY&HANDLINGSOLUTIONS | JULY/AUGUST 2026


15


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54