EDITOR’S CHOICE
PREDICTING THE FUTURE?
THE BENEFITS OF VIBRATION MONITORING & ANALYSIS
useful information. Similarly, a visual inspection can also provide some information such as discolouration on bearings’ raceways, cages and balls which can often be the result of increased vibration leading to wear. Of course, it is not always possible to see
I
all parts on a machine or hear every nuance and there is not always a person on site who has worked with that specific machinery for years and can tell when something is not quite right. Plus, by the time you can hear or see something is not right, the damage has often already been done. So new forms of technology-reliant condition
monitoring have been introduced over the years which are more effective, require less labour
n the 1970s and 80s condition monitoring was largely restricted to audible monitoring with technology playing little part. In other words, you literally listened to the equipment. There is a lot to be said for this and an experienced pair of ears can pick up
By Jason Tweedy, head of Condition Monitoring, Brammer Buck & Hickman Vibration analysis identifies potential
(and experience), but obviously come at a price. The human ear has been replaced by ultrasonic devices and the eye by thermography which looks for heat which can be caused by friction. Either of these are good identifiers of potential issues and which is used depends on the process and machinery being monitored. In the case of rotational equipment, and bearings in particular, ultrasonic is ideal as these parts often produce ultra-high frequency sounds when vibrating. Where access is an issue, such as pylons, thermography is the better solution.
The IncreasIng PoPularITy of VIbraTIon analysIs
Analysing machinery for vibration is becoming increasingly popular. Brammer Buck & Hickman is increasingly finding that maintenance related tenders have vibration analysis stipulated within them. There is a very good reason for this:
vibration analysis allows early detection of wear, fatigue and failure in rotating machinery. That is because vibration occurs in all rotational assets, but generally highlights an issue discovered by higher readings and particular frequencies, mostly as the result of wear and tear but also as a consequence of poor maintenance practices. Vibration builds and leads to equipment failure. A wide range of components and machinery are impacted by vibration, with some of the most common being bearings and gearboxes.
problems and a predicted time to failure (in some cases up to one year in advance of equipment failure) to enable you to get the replacement part in stock and schedule proactive maintenance, thereby reducing unexpected downtime. Furthermore, vibration analysis saves money
on repairs and maintenance, so works out to be a good investment. This can be clearly seen with a client of Brammer Buck & Hickman who was replacing all the bearings on a particular machine every month as they could not afford to have that machine fail. Brammer Buck & Hickman implemented a vibration analysis service with them which has stopped this expensive practice. Instead, it is able to identify which bearings need to be replaced. At the same time, Brammer Buck & Hickman directed that customer to a number of issues that they were not aware of, allowing them to take proactive action.
In-house or ouTsource?
Technology has not replaced human knowledge and experience altogether though. The data presented by the vibration analysis equipment needs to be read, understood and interpreted into meaningful action. So, whilst organisations can buy relatively inexpensive monitoring equipment, they need to have the expertise
14 WINTER 2021 | INDUSTRIAL COMPLIANCE
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
