PRODUCT NEWS
Nourish & Protect Woodworm Killer from BARRETTINE is a traditional, deep penetrating, low odour, oil/ solvent based woodworm killer which prevents and exterminates woodworm and wood-boring insects from timber. It is ideal for treating furniture, flooring and structural timbers. Contact with plastics and roofing felts should be avoided. The product is designed to kill all common insects including common furniture beetles, house longhorn beetles, powder post beetles and wood-boring weevils. It also kills larvae and eggs when in direct contact. Marketing and technical literature available on request. n 0117 960 0060 n
sales@barrettine.co.uk
From BARRETTINE comes the Nourish & Protect – Wood Protective Treatment. This is an ideal wood treatment for outdoor, pre- treated timber structures such as sheds, fences, trellis, pergola and timber gazebos. It is a low build film product that absorbs into the wood with successive coats building onto the surface to give excellent water repellency and beading. The product is oil/ solvent based for deeper penetration of substrate. Contains water repellent resins and film biocide preserver to prevent surface growth of mould and algae and together this helps reduce decay, swelling, twisting of wood. The pigments have good UV fade resistance and will help protect wood from UV damage. n 0117 960 0060 n
sales@barrettine.co.uk
Bug Blaster from BARRETTINE has been designed to be a trusted, reliable and effective insecticide-free spray and aerosol; it has now been reformulated to contain a water soluble polymer that acts with a physical mode of action. The liquid polymer coating immobilises the insect and as a secondary consequence of this film coating, the insect dies. There is no residual action of this formulation, as Bug Blaster contains no insecticide and the knockdown is rapid, says the company. The product is recommended to be used against the small nuisance insects appearing around the home such as flies, ants, bed bugs and fleas. n 0117 960 0060 n
sales@barrettine.co.uk
SCRUFFS’ new innovation, the Trade Flex Trouser, equips trade professionals with the latest in workwear technology to deliver the ultimate wearer experience in terms of comfort, durability and performance. Designed for all-year-round use, the trouser is made from a hard wearing twill fabric with mechanical stretch to ensure freedom of movement. The slim fit shape provides a striking on-trend look.
Abrasion-resistant Cordura fabric knee pad pockets offer two positions for the knee pads for maximum comfort. Reinforced in key areas with triple stitched seams, the Trade Flex Trouser is suitable for a wide range of demanding applications across manual work environments, the company says. There is a variety of pockets at different sizes that are made from a strong, reinforced polyester canvas to carry the vital tools needed to get the job done. Side positioned holster pockets ensure quick access while allowing the wearer to work without being obstructed. Scruffs says whatever the challenge the impressive new Scruffs Trade Flex Trouser is designed to work as hard as your customers do. n 0115 938 9000 n
sales@birchwoodpricetools.com
www.diyweek.net
BARRETTINE’s Nourish & Protect Wood Preserver is a high quality, low odour, oil/solvent based, deep penetrating preserver which is used for the protection against wood destroying fungi (wet rot), wood discolouring fungi and wood-boring insects. It provides a semi-transparent matt/ satin finish, allowing the natural wood texture to be visible. No subsequent top coat product is required unless for aesthetic purposes. It is intended for outdoor use and also for use on windows/frames, external doors/ frames (internal & external sections). The clear product can also be used on structural timbers in unoccupied areas such a floor joists. n 0117 960 0060 n
sales@barrettine.co.uk
Established over 70 years ago as LYTE LADDERS, the company was the first UK manufacturer of aluminium ladders. After producing aluminium products for over 40 years, Lyte started manufacturing glassfibre ladders in order to satisfy the UK demand for this type of access product in the 1980’s. The Lyte glassfibre step ladder range is the only one manufactured in the UK and is tested and certified to BSEN131, soon to be launched under the new EN131 standard along with all our other ladders and steps. Our range of industrial towers was launched in 2002 and grew again in 2004 with our folding tower and continues to grow year after year with more welded products being added to the range. The company says it prides itself in its relationships with its customers and assisting its customers and end users in choosing the correct access equipment for the job in hand. To this end Lyte Ladders has developed its ‘Products in use’ concept. This initiative allows the user to identify what products are suitable for different environments and types of work. The company has developed a series of symbols which easily highlight the products to be used in the most appropriate environments. n 01792 796666 n
marketing@lyteladders.co.uk
24 AUGUST 2018 DIY WEEK 9
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36
