BUYERS GUIDE SURFACE TREATMENT
The changing face of surface treatment T
Frank Eisby, CEO of Vetaphone, discusses the problems facing today’s narrow web converters and offers a simple guide to getting it right
he need for surface treatment to improve the adhesive quality
of ink and lacquers on plastic surfaces was established back in the 1950s and the invention and development of Corona treatment, as the process became known, has largely mirrored the requirements of the market in terms of performance over the intervening years. But, it is fair to say that the problems facing narrow web converters now
speed production. These factors place an increased demand on the Corona unit to deliver the correct dyne level, which typically needs to be rated at 3.0 – 5.0 kW. To understand this concept, think of the similar situation with UV curing, where dwell time under the lamp, defined by power rating and running speed, are critical to achieving a complete cure. The third and final section relates
Vetaphone Corona and iPlasma units are at the cutting edge of today’s surface treatment technology
require a greater degree of understanding if the surface treatment applied is to be effective in today’s increasingly sophisticated market. Far from ‘buy, install, set, and forget’, surface treatment has become as integral to quality production as any other part of the printing process, and to ensure you are using it correctly, you need to understand its operational parameters. I will simplify matters by splitting the process into three clearly definable
requirements. First, there is the need for simple Corona treatment, and this applies to virtually all narrow web press applications. It will typically require a Corona unit to deliver a power rating of 1.5 – 2.0 kW, and provide excellent performance on standard substrates run off at low to medium speeds.
The second section has been created by the development of new and
more difficult substrates. These are run off on the latest generation of narrow web presses that have been optimised by manufacturers for high
MARKETPLACE AIR SHAFTS AIR SHAFTS Svecom lightweight shafts for
easier quicker manual handling. Differential shafts for reliable loading/unloading.
SLOUGH SL1 3QE
01753 825122
sales@jarshire.co.uk www.jarshire.co.uk
BRAKES & CLUTCHES ANILOX ROLLERS ANILOX ROLLS
to those substrates that have been developed to produce what I will
call ‘unique’ labels, typically using special inks and lacquers, lamination, multi web applications and other techniques to produce sophisticated products. The chemical constituents of these substrates require a chemical treatment process as well as a physical one – and in these instances Plasma treatment is necessary to ensure bonding. Plasma should not be considered as a replacement for Corona, more as a logical development of technology to keep pace with the requirements of more sophisticated materials and processes. With print quality taken as ‘a given’ in today’s market, it is essential that
converters appreciate the importance of what can appear to be a minor ancillary process. It’s only as ‘minor’ as expecting a performance car to run properly on low grade fuel. Converters need to wise-up on what all their technology can do for them – and not allow surface treatment to be the forgotten element. For more information:
www.vetaphone.com
Contact Zoe Revell - Tel: +44 (0)1622 699117 ANILOX ROLLS
Contact Zoe Revell - Tel: +44 (0)1622 699117
Unit 1 Budbrooke Point Budbrooke Road Industrial Estate, Warwick CV34 5XH
Tel: +44 (0) 1926 411544 / Email:
sales@motion.uk.com www.motiondrivesandcontrols.co.uk
36 December/January 2018
www.convertermag.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40