search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
Test & Measurement


Ensuring excellence in ASIC production


According to Swindon Silicon Systems, “application specific integrated circuits (ASICs) are the elite choice when it comes to ICs — being designed to meet the unique requirements of an application, they are optimised for a specific function within an electronic system. But with such a bespoke product comes a bespoke production, management and testing system”. Here, Ross Turnbull, director of business development and product engineering at the ASIC design and supply specialist, explains the testing and management mechanisms within ASIC production.


T


he journey of an ASIC from concept to finished product is complex and involves several stages. Opting for an ASIC brings many benefits because it ensures bespoke and optimised performance to the customer, but it also delivers a production test procedure specific to their requirements. This test procedure may use wafer probe, automatic test equipment (ATE) or both, and may have different temperature insertions and with calibration over an extended measurement range.


ATE and wafer probe


ATE systems are designed to minimise the amount of test time needed to verify that a particular device works, or to quickly find its faults prior to the part being used in an end product. Expertise in the test of ASICs at this phase, where the identification of parts that do not meet specification, is crucial to the end customer.


Wafer probe is another element of the production test, which involves testing the functionality and performance of individual ICs on a wafer before they are separated into individual die and packaged. During the wafer probe process, the entire wafer, containing multiple copies of the ASIC design, is tested using specialised automated test equipment. Swindon uses state-of-the-art ATE to perform high-speed and high-accuracy testing. ATE systems automate the testing process, providing consistent results and detailed data for each chip. These tests ensure the ASIC design team can make any changes to the chip smoothly and quickly and identify and fix any anomalies to ensure a high-yield, on-time delivery of the final ASIC product.


Long-term ASIC management As with any IC, there are always concerns around obsolescence. The two main


38 April 2025


components of a custom IC that can go obsolete are the silicon process and the packaging. However, ASICs are designed with non-obsolescence in mind. If a product is designed to last 15 years in production, then the ASIC supplier will choose a suitable silicon process with the required maturity and longevity.


If the silicon process becomes obsolete, the ASIC supplier will normally receive around two years’ notice, providing ample time for a suitable solution to be implemented. The optimum solution depends upon when in the product lifetime obsolescence occurs. If the product is in its last year of life, the customer may prefer


Components in Electronics


to purchase a last time buy (LTB) of fully packaged chips.


For obsolescence that occurs earlier in the product lifespan, an LTB of packaged parts is usually unviable. The next approach is to look at an LTB supply of wafers. This is a much smaller commercial fee, and wafers can be stored in dry nitrogen cupboards for up to 30 years. This effectively acts as a die bank allowing the ASIC supplier to fulfil orders as and when required.


Alternatively, the ASIC supplier could port the design onto a new silicon process, either in the same foundry or a different one. When this option is chosen, the customer may prefer an upgrade in performance, which can be


gained from a newer silicon process, or to keep the performance of the IC the same. The production of ASICs involves meticulous design, rigorous testing and robust obsolescence management to deliver high-performance, reliable chips tailored to specific applications. Swindon prides itself on its comprehensive approach to ASIC development, offering full turnkey (FTK) solutions where all elements of the ASIC design and production process, including testing and ongoing management are done under one roof, making them a trusted partner in delivering innovative ASIC solutions.


https://www.swindonsilicon.com/ www.cieonline.co.uk.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56