CONDITION MONITORING


40th Anniversary 40yrasrevinnAht04


THE FUTURE OF condition valve monitoring


By Imtex Controls A


round the world, there is an increasing concern and growing interest in the impact the oil and gas industry have on


the health and safety of the population as well as the environment. From a business perspective, there is a heightened push toward efficiency and productivity in industrial operations as companies worldwide are increasingly focused on their bottom-line margins. Additionally, operators are looking to respond to industry concerns over ageing assets - as evidenced for example, by the UK Health & Safety Executive’s recent KP4 programme for life extension and inspection. All industrial operations are continually


driving to improve efficiency and productivity to increase profit margins and maximise bottom-line returns. In many sectors (such as the oil and gas Industry), this drive occurs against a backdrop of heightened health and safety demands and environmental concerns as well as the need to implement improvements on old assets that can often be operating beyond their initial design life. An important means of delivering on these


expectations is to reduce the number of unscheduled plant shutdowns. On average 92% of shutdowns are unplanned and cost oil and gas companies an estimated $42 – 88 million a year in worst case scenarios. It has been observed that most unplanned shutdowns are often attributable to worn out equipment, and in a lot of cases is due to the lifespan of an element being exceeded. With a routine maintenance schedule and a


condition monitoring solution, operators could prevent costly shutdowns and increase production up time, reduce maintenance spend and improve plant safety. A study by GE found that data monitoring helped improve oil and gas maintenance schedules resulting in a 36% reduction in unplanned downtime, which in turn resulted in an average of a $17 million improvement to the bottom line. As such, asset monitoring, asset


management, and predictive maintenance solutions are gaining popularity. As valves are a critical constituent element


of any flow-based process, valve performance is an important factor to review when trying to prevent unscheduled maintenance, plant shutdowns and loss of batch production. The immediate effect of valve problems can then be the failure to meet client expectations whilst indirect effects may include higher insurance premiums and


and manufacturing solutions for the process industries for over 30 years. As part of this history, Imtex have been supplying valve monitoring and testing solutions that are easily implemented to both new and ageing assets, to enable operators to log data from shut down valves for a number of years. However, it became obvious that whilst operators are keen to explore condition monitoring solutions, investment in this area has been limited due to the lack of a simple, cost-effective solution that allows for automated end-to-end data acquisition and analysis. Following experience in data capturing for


The VDMS solution helps deliver a safe and more productive plant of the future


increased HSE scrutiny, meaning that, valve problems can often be very costly. Whilst some operators are already


deploying condition monitoring on control valves and critical valves, many valves, notably those used for on/off process and shutdown applications, are often left unmonitored. Whilst technology is available to monitor


these valves, operators are dissuaded from this investment primarily due to the prohibitive hardware and installations costs. Although some OEMs have touted various


valve testing and monitoring systems, many of the solutions offered can pose operational, financial and/or functional implementation issues. This is because they are generally significantly more costly than traditional systems; can require installation of new wiring and hardware and can have software integration. Where the automation is of relatively low value, as is the case with on/off valves, it can be difficult to justify the time and money involved with implementing a useful condition monitoring solution. If, and when, condition monitoring systems


are installed on automated on/off valves, they typically require trained personnel to perform the monitoring task. However, due to a lack of training, lack of specific valve knowledge and insufficient time available, data will often only be analysed for a small fraction of automated on/off valves, if at all. The result of all these factors is that, in the


current environment, vast swathes of on/off valves are not being monitored and subsequently maintained in a useful way, contributing to the risk of valve failures. Introducing the Valve Diagnostic Monitoring System – Imtex Controls has been developing


44 DECEMBER 2020/JANUARY 2021 | PROCESS & CONTROL


critical valves, a NEW automated valve diagnostic monitoring system (VDMS) has been developed to resolve all the implementation and investment issues. By providing seamless monitoring of automated valves using a simple but fully integrated, end- to-end solution, the system helps to deliver a safe and more productive plant of the future. The component parts of the VDMS system


allows this type of system to be installed without any extra cabling, no additional software, and no change in procedures, all for a similar cost to a standard valve position transmitter. This makes VDMS the first of its kind. The difference between the VDMS and other


technology available is that it is easy to install in both green field and brown field environments with minimal additional infrastructure requirements, but allows every valve operation to be automatically captured, analysed and acted upon if necessary through a cloud based diagnostics application. The system monitors the health of


automated valves through comparative and real time analysis of every valve operation with the goal of predicting time to valve failure. Maintenance and pro-active interventions can then be scheduled in advance of any issues. By installing this technology on all automated valves, a plant can ensure efficient production, as well as prevent unscheduled delay and unsafe plant condition. This technology is useful for all stages of


plant operation and so can provide an opportunity to improve efficiency, safety and security of all plants, existing and future. With big data now being recognised as the


future of industrial and manufacturing processes, it’s innovations like the VDMS that can make all the difference to data aggregation for safety, efficiency and not least profitability.


Imtex Controls imtex-controls.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72