TECHNOLOGY IN ACT


40mg/kWh, with high turndown ratios of up to 8:1, across a wide range of models.


Riello’s premix burner s now up to 3MW R


iello RX premix packaged burners are now available in outputs up to 3MW, offering NOx levels of less than


Upgraded AOF OilMist Filters fro mAirbench


A


irBench Ltd have announced an upgraded range of AOF Oil Mist Filters. The AOF range is designed for extraction of oil mist and smoke from machining applications. AOF units can be machine-mounted, or supplied with separate stands where required.


AOF is designed to use the wind shear principle for initial separation of mist from airstreams. As the


contaminant loading on the fan is very low, typically they do not suffer from loss of impeller balance and so can be serviced in-house at relatively Units are supplied as standa


rd with a high-grade final long intervals.


filter with an estimated life of up to 3600 working hours. Usually available from stock, and supplied complete with all parts required for mechanical installation, AirBench can solve most mist extraction issues quickly and simply .


A r Airi Benc ench  01206 791191  www.airbench.com


Riello RX burners feature an exclusive design that includes a patented woven wire gauze ‘sock’ covering the combustion head cylinder. Gas and combustion air are mixed upstream of the combustion head and then pass through precision-located ports and the gauze ‘sock’ to ignite on the external surface of the combustion head. This arrangement enables a very compact flame with a diameter directly related to the burner firing rate, ensuring precise heat control and optimum efficiency at all loads.


The high turndown makes RX burners ideal for systems with variable heat loads where low NOx levels are als o required.


Riie lelllo  01480 43214 4  www.rielloburners.co.u k


Abacus coldmainswatermeter type Emscaled 0 - 999 litres in steps of 1 litre


A


dding a preset quantity of water to a mix has long been carried out using pails or hosepipes. Not very accurate and certainly not consistent.


Now, Hertfordshire company Aqumeter has developed the ABACUS digital water measuring system for dispensing accurate preset quantities of water straight into mixing vessels, tanks, etc. Easy to install and simple to use, the ABACUS delivers repeatable results day in, day out, reliably and consistently.


Thousands of units have been sold worldwide to a whole variety of industries where water is added to powders or granules for mixing purposes. Just dial in the batch amount required and press the start button. The unit stops the flow of water when the required quantity has been delivered...... easy!


Aq Aquameter Ltd  01992 442 861  www.aquameter.co.uk r.


The New UF AV5500 open channel or partially filled pipe flowmeter fromMicronics,


measures Velocity and Level to Calculate Flo w T


channels, partially full pipes and surcharged pipes without a flume or weir. And an ideal solution for


wastewater, storm-water, effluent, industrial wastewater and irrigation water applications.


Submersible Ultrasonic Sensor: The Micronics UF AV5500 uses a submerged ultrasonic sensor to


nel. The sensor re continuously mea


abrasion and the sure both Velocity and Level in the chan-


meter can be configured with the sists fouling, corrosion and


standard submerged velocity-level sensor, or with submerged velocity plus a separate non-contacting ultrasonic level sensor, for highly aerated fluids or those with a high concentration of suspended solids.


The ultrasonic sensor mounts inside the pipe or on the bottom of a channel with a stainless steel mounting bracket (included) and a single screw. No special compounds, tools or hardware are required. And the sensor is completely sealed with no orifices or ports.


It can be configured to measure flow in pipes and chan - nels of any shape, ideal where flumes or weirs are difficult


A New integral 26 million po to install and works with water


Miicronics  +44(0)1628 810456  www.micronicsflowmeters.com CONNECTING CONNECTINGINDUSTRY.Y.COM/P OCESS&CONT O L /PROCESS&CONTROL level from 25.4 mm (1″) to 4.5 m (15 ft.). int data logger is now a standard feature and the meter now supports Industrial


Automation Protocols: Modbus RTU via RS485 or HART (field selectable). M cr nics


OEMAutomatic


celebrates 30 years of successful tradin g


O


EM Automatic Ltd, one of Europe’s leading suppliers of components for industrial automation, is celebrating its 30th anniversary. To mark this milestone, the company’s Managing Director, Richard Armstrong, has invited all 50 staff to join him in a weekend of festivities at Centre Parcs in Woburn.


“I am very proud of our achievements over the last three decades which are testament to the commitment and expertise of our staff, both past and present,” comments Richard. “Our company celebration will be an opportunity to reflect on our history and look forward to our future. “We have cemented our success with loyalty and


partnership agreements with many of the industry’s leading manufacturers. These have enabled OEM to build strong, long-term relationships and offer a comprehensive range of products.


OEM OEM


 0116 284 9900  www.oem.co.uk


PROCESS PROCESS & CO CONTRO ROL | OCTOBER 201 OC 2019 41 4 1


he New UF AV5500 from Micronics is a ”Best Value” easy to use, Area-Velocity Flow Meter for open


TIION


ADVERADVERTORIIAL AL


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52