FEATURE ENVIRONMENTAL TECHNOLOGY
A SSWEETER SOLUTION TO SULPHIDE REMOVAL
Sulphide poses an invisible threat to the efficient operation of AD processes, with the potential to inhibit micro-organic growth, corrode plant equipment and cause odours. DMT Environmental Technology offers desulphurisation technologies and tools to deal with it H2S also has a strong odour of rotten
D
eveloping an anaerobic digestion (AD) plant doesn’t come cheap. Costs range
from £100,000 up to as much as £24m. When calculating their costings and potential ROI, developers often plan for a plant lifespan of 20 years, so it’s essential that plants are well maintained to avoid unexpected expense. There are a number of things which can adversely affect a plant’s longevity, including sulphide, an invisible threat to AD plants which, if left untreated, can impact performance, profit and plant lifespan. Biogas produced through the decomposition of organic matter contains hydrogen sulphide (H2S), a colourless, toxic gas which is one of the main inhibitors of micro-organic growth. If the bugs can’t get to work within the digester to break down the organic matter, then the volume of biogas produced per tonne of feedstock will be dramatically reduced, affecting an AD operator’s profit margins. This is particularly relevant for certain types of plants, as different feedstocks contain different levels of sulphates. Examples of feedstock rich in sulphur-containing proteins include cattle, pig and poultry manure, so on-farm plant operators should be especially vigilant. In addition, there is a high sulphate content in wastewaters from the beer and beverage industry. And in the case of sewage AD plants, sulphates present in wastewater lead to the production of sulphide under anaerobic conditions.
eggs. If it is not removed, this unpleasant smell is retained within the digestate (the nutrient-rich biofertiliser which remains at the end of the digestion process), causing offence to neighbouring communities and making the digestate impossible to sell to farmers and growers. The most damaging side effect of H2S
though, is its ability to corrode essential plant equipment – pipes, compressors, storage tanks, engines, etc – and reduce the life of a CHP unit, the heart of any AD operation. The average lifetime of a CHP unit is around 60,000 hours. If it is operated without any desulphurisation technology, the unit will require maintenance after 20,000 hours of operation. However, the introduction of a step to remove H2S can increase uptime by 50% to 30,0000 hours.
There a range of plant types in the AD
industry, and a ‘one size fits all’ approach should not be applied to desulphurisation. Influencing factors including feedstock type, site conditions, plant uptime, CAPEX and OPEX, and end use of the biogas, need to be assessed before introducing a desulphurisation process. H2S can be removed in-situ during
digestion by air injection or through the addition of iron salts/oxides. It can also be removed from the raw biogas by physical- chemical separation processes or biotechnological methods (or a combination of the two). For high
The Sulfurex Selection Work Expert Tool (SSweet) allows an AD plant
operator to select the most suitable technology for their project from both a technical and financial standpoint, preserving the life of their plant – and their profit margins – for years to come.
concentrations of H2S, chemical scrubbers are usually recommended, while for biogas upgrading, activated carbon filters are typically used as a pre-treatment. For medium or high loads, alkaline scrubbers are preferred, while upgrading technologies based on physical absorption (such as water scrubbers or non-water sorbents) can simultaneously remove H2S and CO2, but usually require a pre-treatment to achieve low concentrations. Failing that, a post-treatment is required to remove H2S from the exhaust air. As well as offering desulphurisation technologies, including a chemical process (Sulfurex CR), a biological process (Sulfurex BF), a biochemical process (Sulfurex BR) and activated carbon for small loads, DMT has developed a system to help AD developers select the best suited desulphurisation technology for their plant. The Sulfurex Selection Work Expert Tool
(SSweet) correlates the plant’s gas flow rate and inlet H2S concentration figures to identify the best suited technology in terms of performance and finances. In addition to this, a tailor-made business case is generated by considering site-specific conditions (such as electricity price, water price, caustic price, discharge cost or labour cost), and uses a mathematical model to estimate the total cost of ownership.
DMT Environmental Technology
www.dmt-et.com
42 JULY/AUGUST 2017 | PROCESS & CONTROL
/ PROCESS&CONTROL
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61