www.xjtag.com
Systech Europe
XJTAG Technology Partner
Flying Probe Innovators Boost Testability and Speed with XJTAG Boundary Scan “
Systech Europe GmbH sells and supports Takaya flying probe test systems, and has many years’ experience with their versatile built-in test and inspection features. To extend test coverage where components are difficult to probe, Systech now integrates XJTAG boundary scan, which provides a simple interface and powerful, easy-to-use features.
Based in Düsseldorf, Germany, and with a network covering more than 20 countries, Systech Europe supplies advanced electronic assembly, inspection and test equipment to European high-tech OEMs and contract manufacturers, and provides services ranging from test coverage analysis and test program creation to complete outsourced testing and reporting.
” The company is responsible for
the entire European sales and support network for Takaya flying probe systems, and also bases its test services portfolio on the speed and flexibility of Takaya’s technology. To enhance testing of devices with I/O pins that are difficult or impossible to probe, such as processors or FPGAs in BGA packages, Systech has integrated XJTAG boundary scan within the Takaya flying probe machines.
“We constantly strive to create superior test solutions for our clients,” comments Jörg Lewandowski, Managing Director, Systech Europe. “XJTAG boundary scan is an ideal accompaniment to flying probe test, offering great functionality and ease of use, as well as a competitive price and flexible licensing model.”
The combination of flying probe and boundary scan is able to produce a solution with both higher combined test coverage and faster test time, and so Systech has assisted XJTAG to create an integrated system that multiplies the strengths of the two technologies.
“It is straightforward to connect the JTAG controller module inside the flying probe equipment, and then to run combined flying probe and boundary scan tests from the Takaya software. This further increases test coverage and can be used to ensure faster cycle times,” explains Jörg Lewandowski.
The XJLink2+ controller provides a convenient way to connect the XJTAG boundary scan system to the hardware being tested, and can control up to four JTAG chains. The
opinion “
XJTAG created a tightly integrated solution that further increases test coverage and ensures faster cycle times.
The excellent features of XJTAG boundary scan, and easy access to technical support from product experts in Cambridge, gives us freedom to innovate and create the test systems we really want to deliver for our clients.
“ “
” Advertorial ” ”
software licence can be held inside the XJLink2+ or as a network license, allowing flexibility for the customer. The XJLink2+ connects physically via an I/O expansion board to the Takaya machine in order to access the flying probes. An XJTAG executable is started on the PC by the Takaya software and communicates with the Takaya system whilst running an XJTAG test project.
With an XJLink2+ and I/O expansion board integrated in the Takaya tester, the XJTAG system can move the flying probes and drive signals on them during boundary scan testing. This access to nets that otherwise would not be controllable during boundary scan testing allows increased test coverage because the system can
Jörg Lewandowski Managing Director Systech Europe GmbH
We constantly strive to create superior test solutions for our
clients. XJTAG boundary scan is an ideal accompaniment to flying probe test, offering great functionality and ease of use, as well as a competitive price and flexible licensing model.
perform hybrid testing where some pins are accessed by flying probes while others are simultaneously driven or read from the boundary scan system. Perhaps less obviously, some flying probe test steps can be removed because boundary scan tests cover the same nets, which results in less probe movements and an improvement in test time.
“The excellent features of XJTAG boundary scan, and easy access to technical support from product experts in Cambridge, gives us freedom to innovate and create the test systems we really want to deliver for our clients,” summarises Jörg Lewandowski. “The result truly is greater than the sum of the parts, and XJTAG has played a large part in making that possible.”
Data Bank
Company
Nature of business
Main products Customers Founded
Location Web site
Systech Europe GmbH HQ Germany
Electronics testing and production systems and services provider
Takaya flying probe testers, CAD conversion, wire bonding
Electronics and microelectronics manufacturers worldwide
1989
(as ITOCHU Deutschland GmbH) Düsseldorf, Germany
www.systech-europe.de www.xjtag.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
