ADVERTORIALS
Assembly and accumulation section for gate valves
A customer required a pallet transfer system for the production of gate valves for water pipes, on which the valves could be assembled and buffered. The system needed to transport the valves to the customer’s dipping station where they would be checked for leaks. Three valves are processed on each pallet, making a total weight of up to 250 kg per pallet. The pallets had to have the option to be stopped at the assembly stations. The conveying path needed to be at an ergonomic working height and be secured in accordance with accident prevention regulations (UVV).
Solution from mk The transfer system supplied by mk was constructed out of chain conveyors and accumulating roller chain conveyors. The profile series used was selected to suit the loads being processed. The conveyors form a circuit on which the alignment of the pallets always remains the same, meaning that there was no need for rotating elements. The pallets are stopped for processing at the assembly stations. Here, the pallets are aligned longitudinally to the conveying
direction, allowing workers to easily reach every workpiece. Pressing a button releases the pallet again. On the buffering section, the pallets are transported transversely to the conveying direction. This allows a large number of pallets to be buffered one behind the other in a small space. At the transfer to the customer’s dipping station, the pallets are stopped again and transported further as soon as the dipping station becomes free again. The controller and sensors were installed by the customer themselves. The customer benefitted from the considerable experience of mk in transfer and circulation systems and could rely on them to understand the requirements and execute the best solution.
Description of KTF-P 2010 Chain Conveyor The KTF-P 2010 chain conveyor is a conveyor system for moderate loads and is ideally suited for transporting workpiece carriers. Its large selection of drives makes it extremely flexible, and it is usually used as the basis for constructing transfer lines. It is available as a single, dual or multiple line system with
either a simple roller chain or a duplex roller chain for higher loads and a larger support surface. The various chains and wear strip guides allow the workpiece to be optimally placed on the conveyor, while their excellent anti-frictional properties make them extremely low maintenance and sturdy. Longitudinal slots in the mk 2010 profile beam provide
flexible options for connecting struts, guides, sensors and components from the mk profile system. Like all chain conveyors, the system can be equipped with an optional tensioning device and continuous lubrication device. The wear and guide strips that support and guide the
timing belt are made from ultra-high-molecular weight polyethylene (PE-UHMW), which provides a low friction coefficient with excellent wear characteristics over a wide temperature range (up to 65°C over extended periods).
mk Profile Systems u 01949 823751 u
info@mkprofiles.co.uk u
www.mkprofiles.co.uk
FEBRUARY 2024 DESIGN SOLUTIONS 19
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
