ills CNC is using a laser triangulation sensor from Micro-Epsilon in one of its bespoke machine tool automation cells
(SYNERGi) with a primary focus on inspecting large, hot rolled steel railway fishplates. The triangulation sensor, which is mounted
on a Fanuc robot end effector, intricately measures the contours – the ‘bend’ and ‘twist’ – of the fishplates to ensure they are within the required manufacturing tolerances. The automation cell then places the fishplates into a Mynx 5400 to be machined. One of the fastest growing machine tool
companies in the UK, Mills CNC is the sole provider of Doosan Machine Tools within the nation and has machines to suit all the manufacturing sectors. The company’s reputation is built on the quality, reliability and performance of the Doosan machine tools it sells. Established in 2018, Mills CNC Automation
was created to project Mills CNC and its customers businesses
forward.Mills CNC saw automation as key to increasingmanufacturing productivity and output for all customers, both old and new. The division, which is located at Mills CNC’s Technology Campus facility in Leamington Spa, has two principal specialisms, Industrial Robots and Collaborative Robots. Chris Ingham, controls & systems engineer
at Mills CNC Automation, comments: “At the Technology Campus, we’ve developed a number of automation systems and machine tool demonstrations for our customers to view. We are currently testing and commissioning an automation system for a customer who needs to inspect railway fishplates manufactured by a hot rolling mill. The project began in late 2020 and the inspection system uses a laser triangulation sensor from Micro-Epsilon.” Fishplates aremetal bars that are bolted to the
end of two rails to join themtogether in a railway track. The hot rolling mill produces the high ductile steel fishplates in four different product groups that vary in length from 0.5m up to 1.0m. Mills CNC Automation has custom designed, and built, a fully automated machine tool pick- and-place system for inspecting the fishplates.
The optoNCDT 1750 laser triangulation sensor from Micro-Epsilon is mounted on a robot end effector in between two magnetic grippers. The laser sensor measures the fishplate in eight different positions (on average) and outputs this data via the Micro-Epsilon IF2030 EtherNet I/P module into the Fanuc robot controller. This data is then utilised by Mills CNC’s own
custom analysis software, with the results displayed on the machine tool HMI. The data is used to verify that the fishplates are within tolerance in all three planes, including whether ‘bend’ and ‘twist’ tolerances have been exceeded.
The laser sensormeasures the
fishplate in eight different positions (on average) and outputs this data via the IF2030 EtherNet I/Pmodule
measuring ranges from 2mm to 750mm. Its measuring rate is continuously adjustable up to 7.5kHz and can be individually adapted to suit each measurement task. Data output is via analogue or digital RS422 interface. Due to the Advanced Real Time Surface Compensation (A-RTSC) feature, the sensor operates almost regardless of the target material and colour. The exposure time or amount of light produced by the laser sensor is optimally matched to the reflection characteristics of the target surface, which enables reliable measurements even of difficult, changing, surfaces. The IF2030 module from Micro-Epsilon converts the sensor’s RS422 output for integration to industrial networks and is available for Profinet or Ethernet/IP. The IF2030 EtherNet I/P interfacemodule is a single channel systemthat is compatible withMicro-Epsilon sensors that output data via their RS422 or RS485 interface. The interfacemodule supports data rates up to 4MBaud and can be installed in switching cabinets via a DIN rail. “When I first contactedMicro-Epsilon,
their application know-how and experience was evident. Once I had fully explained our application toMicro-Epsilon, they advised me on which type ofmeasurement technique would bemost suitable, in this case laser triangulation. Fromthere, they
As Chris Inghamexplains: “If themeasurement
data shows that a fishplate is out of tolerance, the part is rejected beforemachining and returned to the rollingmill. The fishplates need to be within a tolerance of 2mmover a length of onemetre, but we needed a sensor that was reliable and capable of communicating with our Ethernet I/P network. These factors, as well as a favourable price-performance ratio, were critical for us when searching for a suitable sensor solution.” The optoNCDT 1750 is a laser triangulation
sensor with integrated controller that is perfect for mounting on a robot end effector. It is also suitable for high speed distance, displacement and position measurements in a wide range of applications, including automation, machine building, electronics production, packaging, automotive and
processmanufacturing.Mills CNC is using a sensor with a 750mmmeasuring range. The optoNCDT 1750 series is also available in
10
advisedme on which sensor product would best meet our needs. The only aspect of the sensor solution that we decided to carry out ourselves was to build a customenclosure for the sensor that provides additional protection frommachine tool coolantmist,” says Chris Ingham. He concludes: “The sensor is performing well
and is providing reliable measurement data. During the machine test and commissioning phase, the customer has been sending us different groups of parts to inspect and so we’ve really been able to put the sensor through its paces. We’ve been very impressed with the sensor and technical support when we’ve required it. We look forward to working with Micro-Epsilon again in the future.”
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54
