ADVERTORIAL TECHNOLOGY IN ACTION
No limits K
A novel combined pressure and temperature sensor for composite moulding
M
uch like injection moulding and other filling processes, the cavity pressure curve is a key factor in process
optimization and production monitoring. Characteristic process phases such as evacuation, filling and curing can easily be identified from the pressure curve allowing process parameters to be easily optimized to make production more cost-effective. Anomalies in the pressure curve show whether defects can be expected in the final part which, if out of tolerance, can be ejected. The pressure signal is also captured and recorded to allow traceability of individual process steps. Due to the much lower cavity pressure experienced in composite moulding systems, the cavity pressure sensor needs to measure low pressure with high resolution to reliably detect even the smallest pressure or vacuum changes. The new Type 4001A sensor meets all of these demands plus the integrated temperature element, accurate up to 275°C, monitors the temperature conditions inside the mould allowing automatic temperature compensation to correct the pressure signal due to thermal changes during the process.
Kistler 01256 741550
www.kistler.com
New inductive proximity switches sense all metals at same range
plus is the name given by leading sensor manufacturer ifm electronic to their latest range of inductive proximity sensors. The main
feature of these is their reliable detection: long sensing range on all metals, there is no reduction factor. Addition reliability stems from the fact that the K = 1 correction factor
sensor technology is inherently immune to electromagnetic fields. This wide range of devices in standard M8, M12, M18 and M30 housings offers different lengths for different applications, all with flush or non-flush versions and all featuring an industry-standard M8 or M12 connector. These devices are suited to a numerous applications due to their wide operating temperature range and high
protection rating. Installation is made easier by the fact that the thread can be completely used with the lock nuts, right to the end of the housing thread. The robust design in high-grade stainless steel renders this range ideal for all applications.
IFM 020 8213-2234
www.ifm.com/uk
Top Safety Accreditation for Pryor Marking Technology P
ryor, the marking, identification and traceability solutions specialist, are delighted to announce that they have been
awarded accreditation from Alcumus SafeContractor for achieving excellence in health and safety in the workplace. Pryor’s application for SafeContractor accreditation was
driven by the need for a uniform standard across the business, which demonstrates the company’s commitment to safety while providing quality marking systems. “We’re delighted to have been awarded accreditation from Alcumus SafeContractor,” says Simon Dunn, Operations Director at Pryor. “This provides piece of mind to our customers that all our work is carried out by trained staff to the highest standards and is completed following rigorous safety practices.”
This accreditation, which is an industry recognised standard of company compliance on health and safety, is another step in the correct direction for Pryor’s growth.
Pryor Marking Technology 0114 276 6044 Small… Smaller… IXXAT INpact M.2 HMS Industrial Networks now adds the M.2 format to the IXXAT® INpact PC-card range
Ideal for compact control systems and mobile devices With the new IXXAT INpact M.2 interfaces, users can implement PROFINET, EtherNet/IP, EtherCAT, Modbus-TCP, Powerlink and PROFIBUS
slave connectivity with the smallest footprint ever. The compact form factor M.2 2260 (Key B-M) makes INpact M.2 suitable for small and mobile devices, typically used for service, configuration, data analysis or process data visualization purposes. INpact M.2 also fits well in modern embedded computer-based controllers, where it enables direct and easy connectivity to desired industrial networks.
Easy integration via a standardized interface and comprehensive drivers Same as for all IXXAT INpact cards, the INpact M.2 comes with a comprehensive driver package for Windows, Linux, INtime and QNX, offering an easy and fast development process. A uniform programming
interface allows customers to switch seamlessly between different INpact cards and protocols without changing the software.
Proven and reliable multi-network technology The multi-network capability of the INpact is based on the proven Anybus® CompactCom™ technology, in which the FPGA-based Anybus NP40 network processor provides all functionality required to handle communication between the Industrial Ethernet or fieldbus network and the customer application.
Modular multi-protocol concept with full Ethernet flexibility INpact M.2 is available as finalized product with pre-installed network protocol, but it also features a flexible, multi- protocol Common Ethernet version which enables users to save storage cost. Economy of scale is achieved since users can simply select and upload the desired Industrial Ethernet protocol to the INpact by themselves depending on end customer networking needs.
HMS Industrial Networks 01926 405599
36 MAY 2018 | DESIGN SOLUTIONS
uk-sales@hms.se
www.ixxat.com/INpact Smiths Interconnect Releases
Eclipta™ Connector System An innovative solution for disposable medical applications
miths Interconnect, a leading provider of electronic components that connect, protect and control critical applications in the medical market, today announced the release of Eclipta. This high performance edge card technology for disposable medical applications has a range of innovative features that allow for quick and reliable connections whilst delivering the serviceability and affordability required by a broad range of critical medical devices. The easy assembly and high density interconnect design
S
makes it ideal for use with ablation cathethers, RF generators, home healthcare devices, value medical systems and many other disposable medical devices. “Smiths Interconnect is committed to bringing the best- in-class interconnect solutions to the worldwide medical community”, says Paul Harris, VP Sales, Smith Interconnect. “We consider ourselves an all-round business partner to our customers, much more than just a supplier. This operating principle is what differentiates us in the marketplace. Eclipta is an innovative and truly cost- effective interconnect solution for disposable medical applications that delivers a competitive edge to customers whilst also protecting their technology investments.”
Smiths Interconnect +39 010 60361
www.smithsinterconnect.com
CONNECTINGINDUSTRY.COM/DESIGNSOLUTIONS
www.pryormarking.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44