DS-JUN22-PG38_Layout 1 23/06/2022 15:24 Page 2
SUPPLEMENT
ENCLOSURES, SAFETY SOLUTIONS & ENCLOSURE FURNITURE IP66 ELECTRICAL ENCLOSURES AND CABINETS
IP Enclosures specialises in electrical enclosures for low-voltage switchgear and control gear assemblies. Its enclosures are manufactured and designed to the highest standards and are compliant with IEC62208 and IEC/EN/AS60529 for certified Protection in the Toughest Conditions. The enclosures are available in a broad range of high-quality
materials and finishes, such as powder-coated galvanised steel, marine-grade aluminium, 316, 304 stainless steel, and GRP. The brand provides a robust range of standard and custom
enclosure sizes fitted with accessories to suit. The additional accessories serve a wide range of industries and include the option of rain hoods, inner doors, sun shields, locking, mounting brackets, inspection viewing window kits, and LED lights. A wide range of thermal management solutions and assembly options, including ventilation, fans and filters, heaters, and controllers, are also available. IP66 19in data racks and accessories are also available
for housing sensitive data network equipment and include a versatile range of road and infrastructure ITS Field Cabinets that allow for custom-fitted accessories specified to suit project requirements.
COMPACT ENCLOSURE PROTECTS BUILDING CRACK MONITORING DEVICE
Moniteye’s new crack monitoring device is for residential housing installation to enable remedial action and to rapidly resolve insurance claims. The device measures crack width changes over time and transfers data remotely via mobile phone network, removing the need for an inspection by an engineer. It provides daily reports, or more frequently if required, for improved clarity on the structural situation compared to an on-site check that typically takes place once every six weeks. Although Moniteye has provided infrastructure monitoring devices for over ten
years, the equipment used on structures such as road and rail was over-specified and not competitive for mass market domestic use. To protect the device’s PCB, sensor, modem with SIM card, and battery, a bespoke enclosure design would be required that could secure the electrical components from all weather conditions, condensation and impact, within a single compact unit. To meet the requirements, the company turned to Spelsberg. Custom design included an initial batch of 150 units, which Spelsberg was able
to manufacture before scaling up for mass market production. The box was designed based on Moniteye’s specification, and a element included a clear polycarbonate plate, CNC machined at Spelsberg’s UK site, that would house a magnet. Installed on the opposing side of the crack to the sensor, which is housed within the main device, the unit monitors the distance between the sensor and the plate to show movement over time. The design brief for the domestic device meant it had to be as compact as
The Standard wallmount range of enclosures or S range is
fabricated using robust, high-grade powder-coated galvanised steel. The range is compliant with IEC62208 and IEC/EN60529 up to IP66 IK10 NEMA 4 standards; and is available in single- door or double-door construction. IP Enclosures offers a standard range of colours for its electrical enclosures, electrical cabinets and data racks.
IPEnclosures
www.ipenclosures.co.uk
possible, so Spelsberg installed cable glands and inserts for space optimal component location and wiring. The enclosure also had to accommodate a tilt sensor, creating a dual purpose device dependent on the cause of structural damage. In addition, as the unit could be installed outside, protection from the elements was provided with an IP67 rating, meaning the monitoring equipment could withstand the heaviest rain or snow and be impermeable by dust. To avoid condensation damaging the equipment, Spelsberg’s design included a pressure compensation device with an air-permeable membrane that would prevent condensate build-up without reducing the IP rating. Rugged protection from impact was provided by a tough polycarbonate exterior that gave an IK08 rating, meaning protection against an equivalent of 1.7kg released from a height of 30cm.
Spelsberg
www.spelsberg.co.uk
NEW SOFTWARE HELPS WITH CONTROL CABINET BUILDING
According to Phoenix Contact, the specification and filtering of suitable products for a control cabinet project can represent a major challenge. To help, the company offers the clipx Engineer software, which includes a digital assistant that provides precise support for electronics designers in identifying and specifying projects. In functional engineering, product groups can be stored in order to
create shareable templates and configurators. These can be easily integrated into any project and adapted to individual use cases. In addition, by using prefabricated projects, already-proven product combinations can be acquired and used at any time. This ensures that the products are used appropriately and are suitable for the purpose in question. Functional engineering allows the electronics design team to focus on the
requirements of the application. Phoenix Contact
www.phoenixcontact.com
3 DESIGN SOLUTIONS - SUPPLEMENT JUNE 2022 8
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66
