ENCLOSURE & SAFETY SOLUTIONS SUPPLEMENT X Series – Designed to Protect T
ested for ingress to IP67 and impact resistance to IK08, the X series range of heavy-duty enclosures are designed to
protect. From factory floors to testing outdoor environments, the X series is kitted to withstand challenging environments. Available in over 100 product SKU’s, manufactured in
polycarbonate and ABS and sized to suit a multitude of applications from industry 4.0 electronics, wireless IoT sensors to domestic equipment and EV charging stations. The X6 is suited for use in cabling systems with metric
‘knockouts’ provided for efficient installation. When fitted with the relevant cable gland, the enclosure’s IP rating is retained, allowing power conduit and data or signal cables to be fixed to suit ‘on site’ conditions. Its small compact size and useful knockouts create the ideal electronic housing for small smart systems such as agricultural and city setting sensors. No special tools are required and the inclusion of inserts
for DIN Rail mounting designed in, the range ensures a flexible installation whilst not compromising the housing’s mechanical integrity. The housing can also be fixed directly to a wall or by purchasing additional wall mount accessories. Through reinforced corners, the X7 provides increased
protection, making it suitable for harsh outdoor and factory/industrial environments. Sensory equipment is encapsulated in a sturdy housing, fit for all weathers. IP67 sealing provides a barrier against water and dust safeguarding the enclosed electronics. With its large internal space for DIN Rail mounting, the X7
is perfect for power systems, IoT smart devices and wireless cloud equipment. The smallest size (80 x 80 x 60) is a recent addition to the range; a customer was required to comply with new lift legislations and needed a small enclosure to house a sensor. Mechanically strong and robust, the X7 enclosure is
surface mountable by screwing down through the lid mounts, or by purchasing a wall mount kit.
Compliant to IP67 certification, with the X8 your internal
electronics remain dry and protected from dust and dirt. A foam gasket becomes pressured once the lid is in place, keeping out the elements. Ideally suited to DIN Rail mounted components, they are a
flexible solution for machine to machine controls, human interface equipment, or panel built electrical systems in industrial settings. The enclosures are also ideal for electric vehicle charging applications, due to its hinged door and robust casing. Clear lids are available in hinged and locking formats and
in either UL94-V0 polycarbonate or ABS, providing rugged and hardwearing protection to your equipment. The dual door accessory is designed to allow components such as
buttons, display and switches to be mounted directly onto the internal door. The series features a wide range of sizes from 260x110x75mm to 830x630x285mm. Each of the X series enclosures have inserts for DIN Rail
mounting designed in to the internal space, increasing its functionality as an electronic/electrical enclosure. The CNMB series is a modular enclosure, ideally suited to a variety of IoT, drive and control and power management applications and goes hand in hand with the X series.
Camden Boss 01638 716101
www.camdenboss.com
Hammond Electronics: standard enclosures are useless - until you modify them
Hammond offers more than 5000 different standard plastic, metal, extruded and die-cast aluminium standard enclosures. There are no up-front design, engineering or tooling charges for standard enclosures, and they are normally available ex-stock. However, standard products are exactly that: standard. To be used, they will have to be machined to accept switches, displays, I/O connectors, keyboards and other components and they will probably need to be printed with legends and logos. Hammond has made additional substantial
investments in personnel, equipment and systems at its Basingstoke facility to support the increasing customer demand for the original equipment
Hammond Electronics
manufacturer to undertake in-house modifications. The latest £100k+ investment gives a 33% increase in the number of CNC machines and the installation of a new high precision saw has increased total modification capacity by a further 40%, improving service levels and reducing lead times. In addition to the increased manufacturing
capability, service is another key focus. PDF drawings and CAD files for all products are available on
www.hammondmfg.com, allowing customers easily to specify the modifications required.
www.hammondmfg.com
DESIGN SOLUTIONS: SUPPLEMENT | JUNE 2019
37
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60
