FOCUS: HEATING & VENTILATION
BSEE
The hidden ErP compliance issues associated with roof units
Recent changes to ErP legislaon have put contractors and distributors at risk of falling foul of compliance. David Millward, product manager at Elta Group, explains the key consideraons for those tasked with delivering venlaon soluons, and outlines the various opons at their disposal
U
nderstanding the full range of legislation and regulations that apply to ventilation units can be a challenge, but in light of recent changes,
which put contractors and distributors at the heart of compliance, it is more important than ever.
Who is responsible under the ErP directive?
The ‘manufacturer’ has a number of legal duties and responsibilities under ErP Directives to ensure products are compliant with energy efficiency targets. The levels that must be achieved are detailed in Ecodesign Regulation 1253/2014 (explored below), which dictates requirements based on whether the ventilation unit is residential (RVU) or non-residential (NRVU). Crucially, the definition of ‘manufacturer’ has implications for contractors and distributors who may be unknowingly making themselves culpable. Under ErP Directives and the EU Blue Guide, anyone who takes multiple components and puts them together into a single product, such as a ventilation unit, could be deemed the ‘manufacturer’.
This is common in the installation of roof-top ventilation units, which frequently combines a roof cowl and a separate plate mounted axial fan. In this instance, the point at which these two products are combined – whether it is at the point of installation or distribution – is when the responsibilities and legal duties associated with being a ‘manufacturer’ come into force. Those who brand a product, with the intention of selling it on as their own, are also liable to be deemed ‘manufacturers’.
Ecodesign Regulation 1253/2014
The Ecodesign Regulation 1253/2014, which came into force in 2016, establishes minimum requirements for ventilation units. It sets benchmarks across RVUs and NRVUs such as maximum sound power level, availability of a variable speed drive, and minimum fan efficiency. The full range of considerations are
listed in EU documentation, and it is important to be aware that the stipulations apply to any ventilation units that are placed on the market or put into service. There are certain elements of the regulations that are absolutely pivotal, and by engaging with those, contractors and distributors can go a long way towards compliance.
The ErP Directive, and a significant proportion of the Building Regulations, obligates everyone involved in the supply chain to select and supply ventilation equipment with optimum energy efficiency, ensuring that no more energy is consumed than necessary. In reality, this means that the vast majority of commercial and industrial fans need to be provided with some form of control, enabling fan speed to be adjusted in response to demand.
Control options for fans with AC motors
There are a wide range of controls available to manufacturers, although care must be taken to ensure they are suitable for the latest changes to ErP legislation. For example, the Electronic Speed Controller, which is a low-cost solution for fans with AC motors, does not comply with the requirements of Regulation 1253/2014, and must not be used on a NRVU. There is also a reluctance on the part of many fan motor manufacturers to allow such controls to be used with their latest ranges as the lack of energy efficiency can actually lead to motor failure. Transformer Speed Controllers represent a reliable alternative, but they are heavy, cumbersome and costly. They also suffer from significant energy losses, which manifests in the form of heat and contributes to increased electrical consumption. Combined with a tendency towards over-ventilation, this raises serious questions over their regulatory compliance.
The final option for fans with AC motors is a Variable Speed Drive, which provides accurate commissioning and suffers from negligible energy losses. However, they are also large and obtrusive, and require specialist knowledge to set up properly, leading to a higher total cost.
Control options for fans with EC motors
The demands placed on ventilation systems by the ErP Directive has led to an increase in fans fitted with EC motors to enable manufacturers to meet their legal obligations for compliance. Potentiometers, for example, are small, low cost, and provide accurate commissioning with negligible losses. Combining a low energy consuming EC fan motor with minimal control losses provides manufacturers with peace of mind that they aren’t in breach of Regulation 1253/2014.
Some manufacturers now equip EC motor fans with integral potentiometer commissioning devices as standard. It
Read the latest at:
www.bsee.co.uk
allows the fan to be switched on and off by the user via a simple separate switch, or can be speed controlled by setting a maximum fan speed through a separate potentiometer type speed control. Elta Fans’ Skyflow SSRL is an example of this. It is the first low silhouette axial roof unit on the market, delivering an energy and space-saving ventilation solution in a comprehensive product. Designed to help contractors and distributors comply with ErP legislation, its weatherproof versatility lends itself to a range of applications.
Final thoughts
Contractors and distributors of ventilation equipment should familiarise themselves with the latest changes to the ErP Directive. This brief outline is sufficient only as a starting point, but the main point of consideration is whether or not they are making themselves liable by acting as a ‘manufacturer’.
If there is any doubt, they should opt for products that guarantee compliance by ensuring optimum energy efficiency and integrated controls. It is also worth bearing in mind that abiding by the regulations will effectively deliver a higher quality of air, which is beneficial to all and likely to keep customers happy. As part of its campaign to raise awareness of ErP compliance responsibilities, Elta Fans is asking contractors and distributors who sell or install roof-mounted ventilation solutions to answer a short series of online questions. To complete this survey, visit:
https://www.eltafans.com/ erp-warning/
‘
The demands placed on venlaon systems by the ErP Direcve has led to an increase in fans with EC motors to meet legal obligaons
’ BUILDING SERVICES & ENVIRONMENTAL ENGINEER JANUARY 2020 27
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
