Oil & gas
developed in 1999 with input from the British Health and Safety Executive to provide comprehensive guidance on designing, managing and procuring effective alarm systems. The international standards for the management of alarm systems for the process industries, ISA 18.2 from the International Society of Automation and IEC 62682:2015, are aligned with EEMUA 191. One of the key conclusions of the EEMUA 191 guidance is that critical alarms should be easy to understand, promoting quick and effective operator responses. This is where the traditional hardwired alarm annunciators come in. Alarm annunciators are panel-based alarms that are hardwired directly into relevant safety- critical processes, where each window relates to a fixed alarm point from the sensor. If an abnormal event is detected, the relevant window on the panel lights up and the alarm emits a sound, immediately giving operators the necessary information to act. However, it is common when I conduct site visits to still see alarm annunciators in use that were first installed in the 1980s and 1990s, such as Highland, Rochester, Robinson, Bristol Babcock, Clifford & Snell, Sentry and Londex systems, which are all no longer manufactured or supported. As a result, many sites suffer from obsolescence issues.
G
UPGRADING OBSOLETE ALARMS With many former alarm system providers no longer in business, sites haven’t updated the original alarm systems that were installed decades ago. It is vital that physical alarm annunciators are updated in line with current regulations and safety guidance, and display all the critical SHE alarms that operators must respond to. There are three key considerations for plant managers to consider when it comes to updating their alarm annunciators. Firstly, it is crucial that they determine which alarms are classified as SHE safety alarms and that these are directly hardwired into the
processes.
lobally, petrochemical, oil and gas facilities follow the best practice for critical safety, health and environmental (SHE) alarms outlined by EEMUA 191, which was
Tackling alarm obsolescence in petrochemical, oil and gas applications
Gary Bradshaw, director of critical alarm specialist Omniflex, explores the problem of alarm obsolescence and explains why upgrading to new SIL-rated systems might be easier than expected.
This is essential because networked alarms can be susceptible to network or power outages, meaning, if the network goes down, you lose all the alarms on that network. If alarms are individually hardwired, and you lose one wire, you only lose one alarm, and if this alarm is detected from a normally closed open to alarm contact then a wire break would still be seen as an alarm on the annunciator window. The second consideration is the importance
of having each of the alarm windows on the annunciator panel permanently dedicated to a specific process, providing pattern recognition and familiarity for the operator, and, ultimately, improving responsiveness. Operator response times are extremely important, so it is vital that alarm displays maximise the operator’s ability to respond quickly to abnormal events. Finally, having all the alarms suitably
prioritised using an easy-to-understand system, such as colour coding each window to match the priority of the alarm it represents is very important. This means that, in situations where multiple alarms alert, operators can quickly identify their priority, further improving the chances of responding effectively. Despite what many plant managers might think, upgrading out-of-date alarm systems does not need to be costly or disruptive. Modern industrial alarm
specialists can engineer upgrade solutions off- site and design them specifically to fit existing space, reducing installation time and any associated downtime. For industries like petrochemical, oil and gas, where ongoing operational safety is one of the primary day-to-day considerations, plant managers should reassess the suitability of their alarm systems and how they conform with EEMUA 191 and SIL standards. For those in need of help, Omniflex offers a free consultancy service where one of its specialist engineers will visit your site to perform a free survey and evaluate your existing obsolete and legacy alarm systems before discussing the most suitable replacement options with you.
Omniflex
www.omniflex.com
44
October 2022 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86
