ATEX & hazardous areas
I
nstrumentation in hazardous areas operates under stricter requirements than standard plant equipment, and for good reason. Sensors, transmitters and handheld devices work in environments where flammable gases, vapours or combustible dust may be present. What makes this challenging is not just the initial certification, but how conditions evolve after installation.
WHY FIELD CONDITIONS MATTER A device certified in laboratory conditions encounters different variables in actual operation. Ambient temperatures fluctuate seasonally. Dust accumulates on housings, affecting heat dissipation. Vibration from nearby equipment affects electrical connections over time. These factors don’t invalidate certifications, but they do mean that compliance requires ongoing verification rather than a one-time assessment. Surface temperature provides a clear example. A transmitter rated T4 (135°C maximum surface temperature) operates safely at 70°C during commissioning in winter. The same unit in summer, with solar radiation and higher ambient temperatures, may approach different thermal conditions. Regular monitoring ensures ratings remain appropriate for actual operating conditions. Another example: glands and connectors represent critical protection points. They maintain the integrity of enclosures and prevent ignition paths. Over time, vibration can affect terminations, and corrosion may impact contact quality. When replacements are needed, matching the correct gas group (IIA, IIB, IIC) and Equipment Protection Level
24
WHEN INSTRUMENTATION MEETS HAZARDOUS ZONES: UNDERSTANDING WHAT CHANGES IN THE FIELD
ensures continued compliance. Stores departments do not always stock every specification, which is why verification during maintenance matters.
KEEPING DOCUMENTATION CURRENT Plant layouts evolve. Equipment gets relocated during expansions or process changes. Updating P&IDs is standard practice, but ensuring ATEX documentation reflects these changes requires the same attention. Regular audits help identify any gaps between installed equipment and certification records. Modern inspection practices include documenting field conditions with certified equipment. Using an intrinsically safe camera during rounds allows teams to capture installation details, label information and environmental factors accurately. This creates traceable records that support both maintenance planning and compliance verification.
PRECISION IN PRACTICE Hazardous area instrumentation rewards systematic approaches. Verifying specifications during maintenance, updating documentation after modifications, and recording actual field
conditions all contribute to sustained compliance. It is not about assuming problems exist everywhere, but recognising that conditions change and verification prevents gaps.
When instrumentation teams treat compliance as an ongoing process rather than a fixed state, safety becomes predictable and manageable.
ARMADEX
armadex.com February 2026 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73
