Sensors & transducers
mandatory in South Korea, Japan and the European Union. The latter is the most recent to update its legislation, which now makes TPMS a legal requirement for commercial vehicles, as well as passenger vehicles, which will be fully introduced by July 2024.
A THE BENEFITS OF A TPMS
A TPMS ensures the correct tyre pressure is maintained, which is essential to the safe operation of a vehicle. Improving safety and
reducing CO2 emissions were the key areas targeted by EU and US legislators. The system identifies and immediately informs the driver any time that the tyre pressure drops below a predetermined threshold, whether that’s through natural deflation or a slow puncture. A substantial number of vehicles drive with underinflated tyres each day, which by doing so negatively impacts vehicle safety and running costs. A report conducted by the UK’s National Highway Traffic Safety Administration (NHTSA) revealed that vehicles with tyres that are underinflated by 25 per cent are three times more likely to be involved in a road accident, since underinflation results in poorer handling of a vehicle, which in turn makes it less safe and reliable to drive. So having a TPMS, which immediately notifies the driver of a tyre pressure drop, ensures it is handled as soon as a risk emerges.
But it does more than that. A TPMS is a valuable tool to keep maintenance and fuel costs down too as correct tyre pressure inflation will optimise the tyre’s surface contact
TPMS is an important vehicle safety feature that was first mandated as a legal requirement in the United States in 2008. Since then, it has also become
TAKING THE PRESSURE OFF
While a tyre pressure monitoring system (TPMS) was, at first, predominantly the preserve of Europe’s luxury car fleets, it is increasingly becoming a legal requirement across the globe. Currently, the EU is mid-way through mandating its installation in all vehicles - commercial and passenger alike. Here, Richard Mount, director of Sales at ASIC design and supply company Swindon Silicon Systems, explores TPMS and the ASIC within.
throughout its performance. As a result, this in turn will optimise the tyre’s traction, ensure a shortened braking distance, improve the fuel economy, and ensure a slower and even wear along the whole tread area.
THE DIRECT MEASUREMENT SYSTEM There are two options of TPMS - a direct and indirect system. Indirect TPMS works by using data from the vehicle’s antilock braking system (ABS) wheel speed sensors. This method detects a drop in tyre pressure by comparing wheel speeds, since a lower- pressure tyre has a smaller diameter.
However, the more reliable and accurate, and Swindon’s choice, of TPMS is the direct system. To monitor temperature and pressure, the direct system has a sensor within each tyre that is mounted on the valve.
The sensor takes a direct pressure reading, which is transmitted via a radio link back to the central electronic control unit (ECU) in real time, where it is analysed, anomalies are immediately identified, and the system provides a warning if the reduction threshold has been reached.
Direct TPMS sensors are battery powered, and the system must be designed to have a long battery life, which is mainly achieved by utilising impressive low current usage techniques. Each sensor is designed to last 10 years or 160,000 kilometres. As a result, it must be designed for ultra-low power and be able to detect when the vehicle is moving to enable deep hibernate mode during stationary periods.
A key component of a TPMS sensor is an integrated circuit (IC), which performs the crucial signal conditioning and processing functions that convert, manipulate and process the analogue signals from the tyre pressure data into a digital form for use within the control system, and transmit the data via radio link to the car. Because of the unique system requirements, it becomes desirable to use a mixed signal application specific integrated circuit (ASIC) to perform these functions in order to provide a technical and commercial edge over other design philosophies. The Swindon approach is to co-package the bespoke ASIC together with a micro- electromechanical systems (MEMS) pressure sensor and a MEMS accelerometer, all designed by Swindon, in a System in Package (SiP) configuration, which is calibrated and production tested at Swindon’s test facilities.
38 May 2023 Instrumentation Monthly
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82
