| 53
STORING SOFTWOOD AND HARDWOOD Since 1963, specialist timber merchant Thorogood Timber has been producing its range of quality hardwoods and high specification softwoods for the industry. Based in Ardleigh, Colchester, its site facilities include an on-site mill manned by time- served craftspeople, a tool room, a worktop studio and a beam room, which means that no matter how challenging the order, it can deliver to almost any specification. From the start Thorogood Timber has remained consistent in its desire and commitment towards its work. Of course, none of this can be delivered without using the best quality timber available. As timber continues to become an increasingly valuable commodity it needs to be kept in peak condition. Thorogood has four buildings on site that are dedicated to storing and protecting the integrity of its timber products. One of the challenges experienced when storing timber is that it comes in a variety of different lengths. In the softwood warehouse Thorogood Timber was using the block stacking technique, where products are stored directly onto the floor one on top of the other. This meant it was storing multiple lengths such as 3m, 4m and 6m packs in one stack, with the longest lengths at the bottom. This method was proving to be extremely inefficient for the factory especially when the entire stack had to be moved in order to reach the longer lengths.
RACKING RELIABILITY
“When looking for new storage equipment it can be challenging,” said Peter Thorogood, owner of Thorogood Timber. “There are lots of companies who supply cantilever racking but it’s difficult to know which one to choose. We were in the fortunate position that we
have used Stakapal’s equipment before and know the quality of its work. As a business owner you need assurances and that is what we got with Stakapal. The other benefit, of course, is that we are dealing directly with the manufacturer and not a reseller.” With more than 55 years working in the storage industry, Stakapal could bring its technical knowledge and experience to Thorogood and design a solution that maximised the opportunities within the warehouse. As a Full Manufacturing Member of SEMA (the Storage Equipment Manufacturers Association), Stakapal is also committed to submitting its products into SEMA’s independent assessment process. This guarantees the racking has been designed, manufactured, and installed to meticulously defined standards and industry regulations.
CANTILEVER RACKING FOR TIMBER Cantilever racking is probably the most utilised system for timber product storage due to its versatility and ability to create an incredibly safe and easy way of storing long product lengths.
It is designed using vertical upright columns with arms attached at variable heights. The arms can be adapted to accommodate specific load bearing requirements and designed to suit any pack size to fully maximise the available area. Single-sided racks can fit flush against the wall while double-sided configurations create storage space on either side of the central column.
DESIGN AND SPECIFICATION The final design at Thorogood Timber included rearranging the existing Stakapal system and significantly expanding new
racking within the top half of the building that had previously accommodated bulk storage. The reorganisation of the existing racks was fundamental to creating additional space operationally and very specifically to accommodate the new handling equipment that would service the racking moving forward.
Stakapal’s in-house installation teams are SEIRS (Storage Equipment Installers Registration Scheme) registered, a key initiative from SEMA, which trains installers in all health and safety aspects and the correct methods for installing racking. Stakapal worked with Thorogood to complete the installation during the working week to allow staff to move timber around the warehouse in segments, creating space for the work to commence. As each new section was completed, the timber could then be loaded straight on to the cantilever racking, leaving space available for the next part of the installation.
“Many companies offer cantilever racking but we know that Stakapal’s quality is very high,” said Mr Thorogood. “We’ve had its racking in the past and even the equipment it installed in the 90s is still working as it should, remains in good condition and has required minimal maintenance during this period. Stakapal also delivers on its promises – we agreed what we needed before the work started and it stuck to that. Everything went incredibly smoothly and was completed in the week. “As a business owner you need confidence that work will be completed in the agreed timescales and that is what we got with Stakapal,” added Mr Thorogood. “The new racking design has made such a difference to our warehouse, improving manufacturing functionality and efficiencies.” ■
www.ttjonline.com | November/December 2022 | TTJ
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85
