Turbine technology | Organic Rankine cycle
rotor blades are integrally machined on the rotor disks, reducing the number of components and manufacturing times significantly.
Sliding mechanical group bushing The expander rotor is contained in a three casing layout , two radially split at the inlet and outlet sections, and one axially split in the central section, see Figure 2. This configuration, not very common for axial expanders, was selected to reduce maintenance times and costs. Exergy’s patented sliding mechanical bushing (shown in detail in Figure 2), thanks to a combination of spacers, o-ring seals, and centring notches, allows fast replacement of the main expander consumables. With this innovative solution, bearings and mechanical seals can be easily replaced, in half a day, without draining the working fluid, which stays safely confined to the central section of the casing. The bushing system used in combination with calibrated thickness spacers and angled labyrinth seals enables on-site clearance control, directly affecting turbine performance by controlling leakage losses.
Rotordynamics
Operating at a rotational speed of 12000 rpm requires accurate rotordynamic analyses to exclude any vibration related issue during
operation given the supercritical rotor design. State-of-the-art EDM machined journal bearings that act like tilting pads have been adopted to guarantee enough damping and a safe crossing of the rotor’s natural frequencies during startups and showdowns.
Applications – waste heat recovery unlocked
The high-speed axial turbine has been specifically designed for ORC power plants in industrial waste heat recovery applications. Potential implementations include cement factories, glass production, steel production, as well as high-temperature heat recovery from engines, gas turbines and waste-to-energy plants. In these sectors, available waste heat is typically in the range of 4 to 30 MWt and is generally recovered via flue-gas-heated boilers, with heat transferred to users via thermal oil loops. Operating temperatures are consistently around 300°C at the boiler outlet and 150°C at the return. ORC technology represents the ideal solution for power generation in this context, efficiently converting thermal energy into electricity without any consumption of water, an increasingly scarce and valuable resource.
The integration of HSAT with high- effectiveness once-through evaporators
developed under the Ricerca e Innova initiative, has increased conversion efficiency by 2 to 3 percentage points compared to conventional systems. This enhancement unlocks greater electricity generation per unit of recovered heat. According to KCORC (Knowledge Center on Organic Rankine Cycle) estimates, industrial waste heat recovery across Europe could generate up to 150 TWh of electricity annually,
avoiding approximately 123 million tons of CO2 emissions per year.
Small size, high efficiency In summary, Exergy’s high-speed axial turbine is designed to be a good fit with trends in the WHR ORC technology space, increasing feasibility in small size applications thanks to increased efficiency and competitiveness. Its multiple integrally bladed rotor design guarantees the applicability of the same turbine layout over a range of different plant sizes, from 0.7 MWe up to 2 MWe. The patented sliding mechanical group bushing reduces maintenance times and costs significantly, with the possibility of altering expander performance on-site thanks to the labyrinth seals’ clearance adjustment control. The use of advanced bearings and mechanical seals ensures smooth operation at high rotational speed, ensuring high reliability.
New Azores geothermal project will employ Exergy’s radial outflow turbine technology
Exergy has been awarded a €24.5 million contract by EDA Renováveis (EDAR) for the design, manufacturing, construction and commissioning of a 5 MWe geothermal binary plant in Ribeira Grande, on the island of São Miguel, Azores. This will employ the company’s well established radial outflow turbine technology (pictured below).
Exergy radial outflow turbine
Organic vapour out
The project entails the revamping of the Ribeira Grande geothermal plant, which has been in operation since 1994. Two of the four existing ORC units, each rated at 2.5 MWe, will be replaced with a new 5 MWe unit. Exergy’s ORC system, based on a single-pressure-level cycle, will harness a geothermal resource at approximately 150°C in both brine and steam phases to produce clean electricity. The cycle is designed to utilise all available heat content of the steam, minimising geothermal fluid loss. Additionally, the high isentropic efficiency of the Exergy radial outflow turbine will enable the generation of approximately 5.3 MWe of net power, exceeding the 5 MWe requested by the plant owner/ operator, thus enhancing the overall competitiveness of the systems. An air-cooled condensing system will be used to avoid water consumption, and the geothermal steam and brine will be reinjected into the well at the ORC outlet. Exergy’s scope of work includes the full EPC (engineering,
procurement and construction) of the ORC plant and associated gathering systems. The plant is planned to be fully operational before the end of 2026 with the first provisional take-over (partial) scheduled for the end of June 2026. This is the second contract awarded to Exergy by EDA Renováveis,
Generator
Organic vapour in
the renewable energy division of Azorean utility company EDA, following the successful supply of the 4 MWe Pico Alto plant on Terceira Island, which has been in operation since 2017. Geothermal is the most important renewable resource in the
Azores, accounting for around 21% of the total electricity demand in the region in 2024, despite current exploration being limited to the islands of São Miguel and Terceira. The Azores hosts three geothermal plants: two in São Miguel (10 and 12 MWe), and one 4 MWe (Exergy) plant in Terceira.
42 | July/August 2025|
www.modernpowersystems.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79