EMS-820 Precision Pulsed Laboratory Microwave Oven Manifold for up to 5 mixing tubes
FEATURES Easy operation and maintenance Easily adjusted effect % knob Accurate temperature control Well ventilated chamber 3 different timer modes Built in air pump for mixing
Adjustable temperature probe holder
Stainless steel chamber
Glass fiber reinforced silicone floor
Built in reflector for even distribution of microwaves
On/off rotator switch
FOR OPTIMUM RESULTS…
The oven features a very well defined adjustable effect, an accurate temper- ature control, a well ventilated chamber, and three different timing modes for running the unit.
Our temperature control not only prevents the tissue in the chamber from becoming denatured (by high temperature) but it also assists in pulsing the microwave effect in small precise portions. The temperature control has a direct effect on the magnetron (the microwave generator) as it allows the unit to switch on and off in the most efficient way at the preset effect level. The set effect is adjustable at any time either before or during a run. This aids in the balance of the microwave load and the content of the microwave absorber. It should be noted that the penetration rate and process times are influenced by the presence of microwave radiation in the chamber and for this reason it is imperative that the effect rate be adjustable at any given time during a run.
Inside the chamber there is a manifold for up to 5 tubes which allows you to achieve bubble mixing in from 1-5 containers at once. There is a built in air
980
pump that facilitates the mixing, avoiding temperature gradients in the mix- ing process. These adjustable bubble mixers make the EMS-820 ideal for decalcification.
Our oven is so versatile that you have the option to run it in three different modes depending on your application:
1) 3 optional presets programmed by the operator: 5 seconds-99 minutes 2) Continuous run: indefinite time. 3) Timed run: up to 99 minutes. with or without turntable.
The oven chamber is made entirely of stainless steel and it is very easy to clean. It is extremely resistant to all staining solutions that are usually employed in histology and like fields. The floor of the unit, which covers the rotator cavity, is a glass fiber reinforced silicone plate which serves as a thermal insulator and will not absorb microwaves. The plate is totally chemical resistant.