Roll Film Washer For complete washing of your roll film. The vacuum action will gently wash your film to archival standards. This conventional overflow washer lets water in from the bottom and the contaminated water out from the top. The vacuum action washer fills the water from the bottom, but quickly and automatically empties from the bottom by a vacuum syphon action, which discharges all contaminated water 2-3 times per minute. The
vacuum action washer also protects your film from abrasions caused by high turbulance and unwinding of the reel, which happenes in conventional washers. Holds 5: 35mm reels.
74386
Rapid Print Washer
Water from 21 powerful jets runs constantly to separate and wash both sides of prints quickly and
completely. Agitating water engages and dilutes the hypo, carrying it through the washer and out the opposite side quickly. The Rapid Print Washer accommodates 10 to 12 full-sized prints in one loading; all size films up to 11x14” (28x35.5cm). Internal measures: 13”x151
⁄2 74387
Paterson® Auto Print Washer; Standard
Perfect for washing both RC and fiber-based papers. To use, prints are loaded into the cradle which is then lowered into the tank.
Faucet pressure gently rocks the print cradle as water continuously exchanges. All prints remain separate and water freely circulates. The washer holds up to 12-8x10” or 24-5x7” prints. *
74353-10 Paterson® Standard Print Washer each Rapid Print Washer each ”. Roll Film Washer each Paterson® Auto
Print Washer; Major
The Major Print Washer is similar to the standard one, but with a larger capacity and a built-in siphon for convenient emptying after use. The Major holds 12- 11x14” or 24-5x7” prints. *
74353-20
Paterson®
Major Print Washer
each
* Note: For our international users: Standard and Major Print Washers will in fact accept prints to 10x12” (24x30cm) and 12x15” (30x28cm), respectively.
Darkroom Thermometer
Precision Dial stem. Model B comes with 21 ” luminescent dial with a 8” stem, 1
Thermometer: easy to read Fahrenheit and Centigrade scales. Hermetically sealed; water proof; will not fog; made from corrosion resistant stainless steel. Comes with an adjustable positioning clamp. Accuracy to 1 ⁄2
74389
graduations and a calibration adjustment wrench. 74388
Model A Thermometer Model B Thermometer
Fluorescent Ruler
each each
⁄2
°. Model A comes with 13
⁄4
” dial with a 6” ⁄2
°
Fluorescent Scale in inches and centimeters. This metric/english plastic ruler is printed with a pink phosphorescent ink that glows in the dark. It is most useful for all fluorescent viewing and fluorescent photographic work. The scale will fluoresce visibly upon illumination with ultraviolet light and serves as a measure of nucleic acid mobility. The scale is 0 to 6” with 1
⁄16 ” increments on one edge and 0 to 15 cm with 1mm