AUTOMATION
BOSCH INCREASES EFFICIENCY WHEN WELDING HEATING COILS
and formerly known as Bosch Thermotechnik, an automated welding system from Nimak has recently ensured even better performance in the production of heating coils. “By revamping the existing technology, we have succeeded in producing the essential components for heat exchangers in domestic heating systems faster and also more sustainably,” reports Kay Nagel, Head of Sales for Nimak, one of the world’s leading suppliers in the field of resistance welding technology. This involves welding three retaining rods onto the coiled tubing of a heating coil. This is essential to prevent instability, similar to how a spring might suddenly uncoil. Such measures ensure that the connection geometry remains uniformly consistent. The decisive factor here is to use a
A
defined tension on the spiral to position the desired distance between the individual spirals and thus the intended size. As this varies depending on the
t Bosch Home Comfort, manufacturer of heating and air conditioning technology
model of the heating system, the Nimak system has various interchangeable sets that accommodate the respective heating coil. Servo-driven adjustment units and three adjustment slides ensure that the heating coil is precisely adjusted to the required diameter. Depending on the design, an internal or external tension is generated, which in turn determines the size of the spiral. The retaining rods attached on the basis of medium frequency welding then keep this constant. To accomplish this, an employee must
first manually insert the heating coil into the system’s clamping device, close it at both ends of the tube and insert the three retaining rods. Everything else is fully automatic: the system swivels the spiral into the processing position, closes an additional support device and closes the three retaining rods. This is followed by the joining process, in which three welding heads move to the first position and simultaneously join the rods to the first coiled tube. Once this has been done at all the required welding points, the system moves to the
starting position and the employee can remove the finished welded heating coil.
Replacing hydraulics The new system has transitioned from hydraulic to fully electric power. A total of 16 user-friendly programmable axes are used. Kay Nagel asserts that moving away from hydraulics not only reduces errors due to oil contamination, leading to increased reliability, “but also notably decreases cycle times with servo drives. And most importantly, this advancement has allowed us to exceed Bosch’s requirements by an additional 10 per cent.” Compared to the previous production
process, with the new Nimak system Bosch can now manufacture its heating coils more precisely, faster, more dynamically and more flexibly. In addition, the servomotors now in use enable more sustainable production than before. “Not only are they considerably more energy-efficient,” emphasizes Kay Nagel, “in principle, they can even be powered by renewable energies.”
www.nimak.de/en/
www.welding-world.com WeldingWorld1 / 29
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40
