REWORK
The HAKKO FR-811 SMD rework system is an affordable and easy to use system that simplifies the hot air rework of SMD components, including BTCs such as QFN/DFN and BGA using up to six stages for a rework profile, and includes a board only preheating stage to allow for proper reflow at lower top heater temperatures. One thermocouple input provides closed-loop top heat control based on part temperature while the other input provides closed-loop bottom heat control based on PCB temperature.
FR-811
SPECIFICATIONS Part No.
Model Name Input Voltage
Power Consumption
Heater Power Consumption Airflow Source Airflow Capacity1 Vacuum Function Temperature Range2 Thermocouple Inputs External Connections Operating Modes Memory
Process Control
Auto Power Off Safety Auto Cooling Safety
Handpiece Length (w/o cord)1 Handpiece Weight (w/o cord)1 Station Weight (w/o cord) Nozzles (not included)
Station Dimensions W x H x D
Safety Approval ESD-Safe
FR811-04 FR-811
120 VAC 50/60 Hz 820W 790W
Turbine
Setting 1-100% (115 L/min Max.) Yes
50° - 600°C / 120° - 1120°F 2 - Type K
1 - USB-A and 1 - USB mini B Manual or automatic 50 x 6 Stage + Preheat Password lockout Yes Yes
250 mm / 9.8” 180 g / 0.40 lb 1.5 kg / 3.3 lb N51 Series
160 mm x 145 mm x 220 mm 6.3” x 5.7” x 8.7”
cMETus Yes
1 Airflow capacity is rated as free flowing. Restrictions created by various nozzles
may reduce the maximum airflow capacity. 2
Under certain airflow and temperature setting conditions, the station may not attain the maximum allowable temperature selection.
Features: • Stand-alone holder with safety shield • Auto power off for safety • Clear and easy to read graphic user interface • Incorporates continuous closed-loop feedback control • Thin wall nozzle design to fit densely populated PCBs
43 1-800-88-HAKKO
• Nozzle vent system to mitigate adjacent reflow • Integrated vacuum pickup system that includes a visual indicator for reflow
• External USB connection for flash drive profile storage
• Optional PCB fixture with fine adjustment and quick release capability
• Optional handpiece fixtures for use with the HAKKO C5016 bottom heater or other pre-heaters
Two remote thermocouple inputs for integrated
closed-loop process control.
USB to PC interface to allow for PC communi- cation with the system.
USB port for flash drive storage of rework profiles.
Nozzle design to optimize heating and mitigate adjacent reflow, even on densely populated PCBs.
Included with the HAKKO FR-811 is communi- cation software that allows for PC control of the system, enabling the user to create and modify rework profiles, and the ability to upload them to, or download them from the system.
SMD HOT AIR REWORK SYSTEM with Vacuum Pickup
Integrated vacuum pickup with visual reflow indicator that safely lifts the com- ponent off the PCB at the right time.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72
