BUILDING FABRIC 55 Sto helps residential development exceed U-value requirements
A Sto external wall insulation system has maximised thermal efficiency for more than 240 homes within a new residential development in Bracknell. Prioritising environmental sustainability, a range of features has been introduced, including solar panels and a heat pump system. Working in partnership with BDG and Sto’s authorised installer, Stoneguard, Sto supplied a specification which would enhance the development’s eco-credentials. The StoTherm Mineral K insulation system was selected and designed to achieve a U-value of 0.12 W/m2
K for the wall structure,
exceeding the requirements of building regulations. The BBA-certified StoTherm Mineral K external wall insulation system achieves a reaction to fire of A2-s1, d0 in accordance with BS EN 13501-1 and uses mineral fibre insulation boards, which optimise thermal efficiency and fire protection. The insulation boards were fixed to the substrate using StoLevell Uni adhesive followed by a reinforcing coat. Sto-Glass Fibre Mesh was then embedded into the reinforcing coat while wet providing the system with crack resistance. The system was finished with StoSilco K2.0 silicone resin render in white and mid grey to provide high levels of water repellence and protection from harsh weather. The application of StoColor Silco G, a silicone resin facade paint, bolsters durability by protecting the building from algae.
0330 024 2666
www.sto.co.uk HBD10_Sto_Building Fabric - External Wall
Insulation_DPR.indd 1 Brett Martin’s flat glass rooflight receives BBA approval 21/10/2024 13:35
Brett Martin is pleased to announce that its Flat Glass Rooflights have recently secured BBA Approval. Brett Martin is one of only few UK rooflight suppliers to obtain this certification. A modern alternative to the Roof Lantern, the Flat Glass Rooflight range offers a stylish means of bringing light into contemporary building designs. As well as more than 100 standard sizes, Brett Martin is now offering bespoke sizing and new colour options, meaning the Flat Glass Rooflight is fit for any refurbishment or new-build project. The Flat Glass square and rectangular rooflights in the range can now be coated in RAL 7016 grey and RAL 9005 black, in addition to the white that was previously available. The company’s recently launched Flat Glass Access Hatch is also available in the same colour options, for applications where access is required. All Brett Martin’s rooflights are manufactured using laminated glass which is engineered not only to resist breakage as much as possible but – if it does break – to break in a way that is both safe and secure. Constructed from two panes of float glass with an added polymer layer bonded between, laminated glass will not shatter into individual pieces on impact. Instead, it will form a characteristic spider’s web pattern, reducing the likelihood of the broken rooflight falling on anyone below.
daylight@brettmartin.com
www.brettmartin.com/daylight-systems/our-products/product/flat-glass-rooflight HBD10_Brett Martin_Building
Fabric_DPR.indd 1 11/10/2024 11:35
WWW.HBDONLINE.CO.UK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84
