46
C SCH ShellCare® TRAX
D Vitamin E Acetate KEM EHG
Xanthan Gum
Aqua, Polycaprolactone, Tranexamic Acid, Polyvinyl Alcohol, Sorbitan Stearate, Propanediol, 1,2-Hexanediol, Caprylyl Glycol
Tocopheryl Acetate
Phenoxyethanol, Ethylhexylglycerin Xanthan Gum
3
0.5 0.8 0.3
Procedure: Dissolve Glycerin in distilled water (Phase A). Heat to approximately 60°C while stirring gently. In a separate container, mix all surfactants (Phase B). Heat to 60°C until a homogeneous mixture is obtained. Slowly incorporate into Phase A under constant stirring. Once Phase A+B cools to below 40°C, add SCH ShellCare® TRAX (Phase C) and stir until fully dissolved. Add Xanthan Gum slowly to the solution while stirring to avoid clumps. Follow with the addition of the preservative and Tocopheryl Acetate. Continue mixing until fully homogenized. Check pH and adjust to 5,0 – 5,5 if needed. Cool to room temperature and pack. Properties: Appearance: Transparent gel cleanser. pH (25°C): 5 – 5,5 Viscosity (25°C): 2000 – 4000 cP (sp 3, 20 rpm)
SYTHEON
SPF PROTECTION LIP BALM WITH SYNOXYL® AZ AND HYDRASYNOL® DOI PHASE INGREDIENTS
INCI NAME
A Jeechem CTG Coconut Oil Sunflower Oil
Yellow Carnauba Wax NF
Candelilla Wax NF
Finsolv TN Cetiol OE
Kester Wax K-60P Shebu Refined
HydraSynol® DOI Synoxyl® AZ
Caprylic/Capric Triglyceride Cocos Nucifera (Coconut) Oil
1
SPLR % W/W 15.00
Helianthus Annuus (Sunflower) Seed Oil 1 Copernicia Cerifera (Carnauba) Wax Euphorbia Cerifera (Candelilla) Wax
UV Cut ZnO-68-CG Zinc Oxide & Caprylic/Capric Triglyceride & Polyhydroxystearic Acid
C12-15 Alkyl Benzoate Dicaprylyl Ether
Polyhydroxystearic Acid
Butyrospermum Parkii (Shea) Butter Isosorbide Dicaprylate Acetyl Zingerone
2 20.00 13.00
3 5.00 3 10.00 4 15.00 5 6.00
6 4.50 3 7
1.50 5.00
8 4.00 8 1.00
Procedure: Weigh Phase A in the main kettle equipped with a propeller mixer. Heat to 80-85°C. Mix until all solids are dissolved. Pour samples into sticks at 75°C.
Suppliers: 1. Jeen 2. Protameen 3. Koster Keunen 4. Grant 5. Innospec 6. BASF 7. Rita 8. Sytheon ZELLULIN® (AVANT) TRI-K
RISE & SHINE AMPOULE PHASE INGREDIENTS
A D.I. Water
Aloe Vera 200X Biopure GLDA
B Zemea
C Sodium Benzoate Hyaclear® 7
INCI NAME
Water/Aqua/Eau Aloe Vera Powder
Water & Tetrasodium Glutamate Diacetate
Propanediol
Natrosol 250 HHR CS Hydroxyethylcellulose Sodium Benzoate
Water (and) 1,2-Hexanediol (and) Sodium Hyaluronate
NaturePep® Sacha Inchi
TRIstat® PE
Hydrolyzed Plukenetia Volubilis Seed Extract
Phenoxyethanol & Ethylhexylglycerin D 20% NaOH Solution Water & Sodium Hydroxide
SPLR % W/W 86.05
1 0.80 2 0.25 3
4 1
1 1
4.0 1.0
0.50 3.00
3.00 1.00
0.50
ZELLULIN® ZELLUGENTM ACTIVELY REGENERATIVE HYDRATING WATER-BASED SERUM PHASE INGREDIENTS/ INCI NAME
A Glycerin/Caprylic/Capric Triglyceride/Water/Sucrose Laurate/ Isostearyl Isostearate
Sucrose Stearate B Glycerin
Xanthan Gum/Sclerotium Gum/Algin Propanediol
C Water D Water/Arginine Levulinate/Arginine Anisate/Glyceryl Caprylate
Water/Hydrolyzed Minnow MuscleCell Lysate/Potassium Sorbate/ Sodium Benzoate/Citric Acid
% W/W
10.40 10.00
4.00 0.50 15.00 48.10 2.00
10.00
Procedure: Prepare Phase A and heat to 45-60°C while stirring until uniform. Prepare Phase B and add to Phase C at 45-60°C while stirring until uniform. Combine Phase A and Phase B/C while stirring until uniform. Add Phase D to Phase A/B/C below 50- 55°C while stirring until uniform. Adjust pH with Citric Acid and Sodium Hydroxide.
Procedure: Under mixing add Phase A materials one by one. Heat to 70-75°C. Once Phase A solution is uniform, cool the contents to 60-65°C. Add the Premix of Phase B to Phase A and cool to 40-45°C. Add Phase C materials one by one and mix until a homogeneous liquid is obtained. Adjust pH to 5.0 – 5.8 by adding phase D slowly. Properties: Appearance: Clear yellow liquid pH: 5.3-5.7
Suppliers: 1. TRI-K Industries, Inc. 2. Aurorium 3. CovationBio PDO LLC 4. Ashland
VANTAGE PLUMPING LIP INFUSION
PHASE INGREDIENTS A Maxigloss™ Plus Liponate™ CCC
DW Jojoba Colorless Organic
B Jeechem® NDA—LC C Univul A Plus Granular
Tinosorb® S Univul T 150
D Vitamin E Acetate E Preservative
F Covapate Unired G Fragrance Lips Care
LC 3728 INCI NAME
Octyldodecanol (and) Ethylcellulose (and) Isostearyl Alcohol (and) Hydrogenated Dilinoleyl Alcohol
Coco-caprylate/Caprate
VPC.05.24.016 SPLR % W/W
1 40.00 1
Simmondsia Chinensis (Jojoba) Seed Oil 1 C9-12 Alkane
Ethylhexyl Methoxycinnamate (and) Diethylamino Hydroxybenzoyl Hexyl Benzoate
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
Ethylhexyl Triazone Tocopheryl Acetate Preservative
Ricinus Communis (Castor) Seed Oil (and) CI 45410
Parfum (Fragrance)
16.66 10.00
1 20.00 2 6.50
2 2.50 2 2.50
3 0.30 4 1.00
5 0.04 6 0.50
Procedure: In the main beaker, weigh phase A ingredients and heat up to 75°C with moderate stirring. Then, decrease temperature to 65°C. In an annex container, heat phase B to 65°C and add slowly phase C ingredients one at a time until complete solubilization. Then, add phases B+C to phase A and homogenize until uniform. Cool down the batch to 45°C. Finally, add phase D to G ingredients one at a time and mix until uniform. Properties: pH: N/A Viscosity: 15000-20000 cps Stable for 12 weeks (25°C ; 4°C ; 45°C ; light)
Suppliers: 1. Vantage 2. BASF 3. Tri-K 4. Local 5. Sensient 6. Takasago
PERSONAL CARE 2025년 6월
www.personalcaremagazine.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
