ADDITIVES | RECYCLING
Tuned performance US-based materials design company Techmer PM specialises in modifying and fine-tuning properties of technical polymers. Developed primarily for the fibre and non-woven market, its PP Recycle Enabler is designed to retain Melt Flow Rate (MFR) and impact properties in both PP homopolymer and copolymer during recycling. The company is also addressing the issue of PE contamination. “There is a recurring challenge in nonwoven production when recycled resins combine both PE and PP components, especially through bi-component nonwoven lines,” says Kaan Serpersu, Product Development and Sustainability Manager. “Techmer PM’s Recycled PP/PE Stabiliser addresses these complexities by employing a stabilisation process to harmonise the properties. The additive reduces interfacial tension between the polymer types, promoting better mixing and enhancing mechanical properties. The process also retains the MFR and colour properties of the recycled resins.” The company has also developed additives for use in PET recycling. HiTerra rPET Revive, launched earlier this year, aims to rebuild the resin’s polymer chains, increasing viscosity and reducing yellow- ness. “rPET Revive can allow for a higher regrind/ recycle rate and improve productivity,” says Steve Smith, Techmer PM’s Market Manager for Rigid Packaging. “We selected the active ingredient to be compatible with PET resins used in fibre and moulding applications. Converters can use it in the production of thermoformed sheets, and the product is showing good potential for use in bottles.”
Also targeted at PET recycling challenges,
Polyvel’s ReVal additive masterbatches now include its rBoost PET Chain Extender, which is designed to increase the intrinsic viscosity (IV) and impact strength of recycled PET. Developed for use in compounding, fibre, extruded sheet, injection moulding and blow moulded bottle applications, it also reduces the yellowness index of rPET and is claimed to improve processability.
CLICK ON THE LINKS FOR MORE INFORMATION: �
https://corporate.evonik.com �
www.clariant.com �
https://voelpker.com �
www.caiadditives.com �
www.imerys.com �
www.ampacet.com �
www.cotrep.fr �
www.techmerpm.com �
www.polyvel.com
Above: PET pellets reprocessed four times with and without use of Polyvel’s rBoost additives
IR-FRESH® IR-CLEAN®
ODOR REDUCTION OF POST-CONSUMER MATERIAL DECONTAMINATION OF rPET FLAKES FOOD GRADE
Made in
Germany
www.kreyenborg.com
plastics@kreyenborg.com
eyenborg.com
plastics@kreyenborg.com
Booth B-543 NORTH AMERICA
IMAGE: POLYVEL
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58
