MACHINERY | ENERGY MANAGEMENT
The units are equipped with pump efficiency module (PEM) as standard, controlling the speed of pumps and resulting in high energy efficiency. Compared to conventional technologies that use uncontrolled peripheral pumps, they can achieve power savings of up to 92%, says the company. “The new series sets a new standard for sustain-
ability, energy efficiency and user convenience,” said Dave Palmer, general manager for UK at ICS Cool Energy. “It delivers reliable temperature control and superior performance while reduc- ing energy consumption.” Key features and benefits include: high efficien-
Below: MouldPro’s Flosense gives optimum control over mould cooling processes, to reduce energy consumption
cy, thanks to centrifugal pumps with speed control; advanced control systems, including a 7in multi- touch display; and sustainability, with significantly reduced electricity consumption. A unit with a centrifugal pump in control mode, in a typical three-shift operation (under production conditions with the flow rate at 85l/min and heating capacity at 27kW), annual energy use can be as low as 1,160 kWh, according to the company – provid- ing both cost and environmental benefits. “A focus on reducing our customers’ carbon emissions and optimising process conditions drives and shapes our offering,” said Palmer.
Thermal management At NPE, Globeius high- lighted a number of products from Mouldpro of Denmark, for which it is
IMAGE: MOULDPRO
the exclusive distributor in North America.
One highlight was the Flosense thermal management/mould monitoring system. Flosense
provides optimum control over mould- cooling, to improve part quality and reduce
cycle times. The Flosense IQ-One interfaces with the dedicated TCU/mould heater and controls pump speed and temperature – which helps to reduce energy consumption and optimise the thermal process. At the same event, Sonics & Materials, a supplier of ultrasonic plastics welding equipment, introduced a new DX Series OEM DSP power supply at NPE – the DX800 – which offers energy savings, increased throughput with faster welds and advanced data capture and control. The DX800 offers time and energy control with an LED bar graph for easy-to-view activity monitoring and error status.
CLICK ON THE LINKS FOR MORE INFORMATION: �
www.tmrobotics.com �
www.sumitomo-shi-demag.eu �
https://europlaz.co.uk �
www.wittmann-group.com �
www.axmann-plastic.de �
www.kraussmaffei.com �
www.icscoolenergy.com �
www.globeius.com �
www.sonics.com
Left: Sonics says its new DX800 offers energy
savings, increased throughput and faster welds
SPREAD THE WORD
Let the world know about the good things your company is doing by advertising in Injection World magazine. Download the media pack to find out about our
forthcoming features, global readership, and cost-effective advertisement packages.
CLICK HERE TO DOWNLOAD
IMAGE: SONICS & MATERIALS
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42
