Two measuring devices, two applications.


In addition to the WARP portable, the self- contained WARP GAUGE sensor, com- bined with simple kinematics, automatically measures blow-molded parts after de- molding. The sensor is guided perpen- dicular to the part surface and generates a grid of measuring points depending on the frequency and speed of the movement.


The measuring points measure the


distance, wall thickness, and, if applicable, the diameter of the component. In combi- nation with the sensor position, the contour of the part can also be recorded, providing information on the ovality of the part.


In addition to measuring demolded parts, the WARP GAUGE sensor can be integrated directly into the blow molding system to provide measurement data during the extru- sion of continuously produced melt hoses.


The small size of the WARP GAUGE allows flexible integration into the line depending on process control and part geometry.


The key is to find the point where the data generated is as meaningful as possible and the number of measurements is sufficient to draw conclusions about the process and actively implement process control.


More information:


iNOEX GmbH


Your contact: Peter Koll


Business Development peter.koll@inoex.de


Maschweg 70 49324 Melle Germany


info@inoex.de www.inoex.com


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54