ADDITIVES | COMPATIBLISERS
Right: Coupling agents can improve adhesion in PA/TPE
overmoulding applications, according to Polyscope
between PA substrate and the over-moulded material, leading to an excellent adhesion and a high quality final part,” he says. Doelen cites the example of one PolyScope customer that was using a PP-g-MA type polymer to increase the adhesion between TPE and PA, explaining that by using Xibond180 at a 5% addition even better adhesion was achieved.
Bio branches out Also branching out into new areas is Yparex, previously part of DSM and now part of the Dutch holding The Compound Company. It has been known for some considerable time for its extrud- able adhesives (polyolefins modified with maleic anhydride), which are used for multilayer barrier food packaging as well as multilayer pipes. For the last few years, however, the company has also been offering polyolefin-based coupling agents and compatibilisers with extremely low amounts of residual maleic anhydride. “A high level of residual maleic anhydride causes worries for the injection moulders regard- ing the surface quality of the moulds,” says Frank Huijnen, Business Development Manager at Yparex. “In addition, the trend towards more sustainable compatibilisers is noticeable. Yparex was the first to offer bio-based products. We expect to also have biodegradable compatibilisers available within a few months. Furthermore, there is a trend towards compatibilisers for new material combinations like PE-PC.”
Below: Properties of WPCs can be enhanced significantly using Clariant’s functionalised Licocene waxes
WPC options Clariant has developed a range of maleic anhy- dride (MAH)-grafted metallocene waxes, branded Licocene, and one target application is polyolefin- based wood-plastic composites (WPCs). The maleic anhydride is grafted onto an olefin backbone. The MAH-grafted moiety is free to react, or couple with, the cellulose (wood), while the long chain end of
the wax entangles itself with the olefin base polymer (be it LDPE, LLDPE, HDPE or PP) of the WPC. AS a result, the strength of the composite is improved and, as the two materials now flow as one, the flow is more lamellar and the flow rate increased. Extrudates are also said to have a smoother surface and show improved water repellency.
Clariant says common structural reinforcers and
fillers like calcium carbonates, glass, talc and chalk are also better coupled to the host polymer when using MAH-grafted Licocene waxes. “Of course, with glass fibres and certain mineral fillers, the bonding is more centred around coupling with the surface treatments, such as the amino group of aminosilanes often used with glass fibres, or the organic acid treatment of certain minerals,” says Frank Neuber, Regional Technical Segment Manager, Clariant Plastics and Coatings, Business Line Advanced Surface Solutions. “The new interfacial boundary is now more
complex and deeper than just a surface bond, which improves adhesion and can augment impact results, as the [now] more complex and deeper interface dissipates force better. This can be seen in structural profiles, 3D printing stock and injection moulded heavy-duty articles.” Laboratory data has confirmed that the coupling
effect seen with the high percentage (6-7% MAH) grafted PE-MAH and PP-MAH Licocene waxes greatly improves the tensile strength, E-modulus and impact strength of the filled olefin compounds, so allowing more durable products which replace traditional wood or metal applications.
Melt blending US-based PolyGroup, a marketer of specialty thermoplastic polymer products, points to two grades made by Two H Chem in Korea. Novacom and Novacom-P are specifically designed to
72 COMPOUNDING WORLD | May 2018
www.compoundingworld.com
PHOTO: CLARIANT
PHOTO: SHUTTERSTOCK
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
