NPE 2018 | EXHIBITION PREVIEW
TR 219 has applications in PA 6 and 6,6 com- pounds and has been found to be effective in polyester (PET and PBT) compounds, especially in recycled or recyclate-containing applications or in cases where the polyester compound is contami- nated with other plastics. For recycled polypropylene, Struktol RP 23 is a new multi-functional package that incorporates vis-breaking technology with lubricant and mould release functionality. This product expands the current line of products, which includes RP 11 and RP 38 (the latter provides viscosity modification and lubrication in recycled PP compounds contain- ing moderate to high levels of PE contamination). Other products on show include Struktol TR 251, a combination product that includes both surfactant and lubricant technology for enhanced functionality in polyolefins and engineered plastics, and Struktol TR 052 compatibiliser and blending aid. �
www.struktol.com
Teknor Apex will introduce two new lines of PVC compounds, including a range that complies with the new California Proposition 65, and an line of TPEs for injection syringe plunger applications. Aimed at the building industry, the Apex 2324A2 Series PVC compounds are formulated to comply with the California Proposition 65 ingredi- ents list without sacrificing performance in either indoor or outdoor applications. The family of eight compounds covers the Shore A hardness range from 55 to 90. The opaque grades are said to process well by extrusion over a wide temperature range and in some cases are suitable for co-extru- sion with rigid PVC. The Apex 1523-LG Series compounds are low
gloss flexible PVC injection moulding grades developed for automotive window encapsulation where they provide a good cosmetic match to
EPDM while retaining PVC’s cost-performance benefits. According to Teknor Apex, the lowest SPI gloss levels for standard PVC compounds used for window encapsulation are in the 9 to 12 range and are achieved through etching or sandblasting of the tool surface; Apex 1523-LG Series compounds achieve a gloss level in the 3 to 4 range with no tool surface treatment (and hence less ongoing tooling maintenance costs). In the medical sector, the company says its latest
Medalist TPEs provide better sliding perfor- mance against glass and plastic syringe bodies, are less costly to mould than commonly used rubbers, and provide the opportunity to simplify manufacturing thorugh techniques such as overmoulding. Stoppers moulded from the new
Medalist TPEs display consistent piston release and travel force due to their low coefficient of friction. The compounds can be overmoulded onto PP, as well as engineer- ing resins including polycarbonate, ABS, PC/ABS, acrylic, acetal, PBT, and COPE. Unlike most TPVs, Medalist TPEs do not require pre-drying, says the company. �
www.teknorapex.com
Tolsa will highlight new technical developments in its Adins range of high-performance flame retard- ant synergists. The additives are based on natural silicates, offering tailored performance benefits and making it possible to replace part of a high- loaded flame retardant system to provide better processability. Adins Clay works with standard wire and cable
formulations based on halogen and halogen-free solutions. The company says that the synergists have demonstrated good efficiency in HFFR systems based on EVA/PE and ATH and/or magne-
www.compoundingworld.com
Above: Teknor Apex will launch a new range of TPEs for syringe stoppers
Above: Apex 1523-LG PVC from Teknor Apex is
intended for window glass encapsulation
Left: Tolsa will present the latest additions to its Adins flame retardant synergists for wire and cable
May 2018 | COMPOUNDING WORLD 61
PHOTO: TOLSA
PHOTO: TEKNOR APEX
PHOTO: TEKNOR APEX
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88