August, 2017
www.us-tech.com
New Yorker Offers High Voltage Withstand RC Circuits
Northvale, NJ — New Yorker Electronics has rolled out its full series of Electrocube RC networks arc-suppressing resistor-capacitor (RC) circuits. Electrocube’s RC net- works are designed to prevent or sub-
strength to withstand voltage. Arc suppressing RC networks
consist of specially-designed preci- sion capacitors and resistors connect- ed in a series. Spark discharges and induced noise are absorbed over a wide range by the accumulation characteristic and impedance of the capacitor, while the RC time con- stant delays and averages surge volt- age and oscillations. With a wide selection of case
configurations and different num- bers of leads, Electrocube RC net- works are manufactured for both off- the-shelf and custom design specifi-
cations for single-phase or three- phase applications, from one network to 40 networks in a container. Thousands of unique suppression designs eliminate surges produced by relays and solenoids. To store surge voltages and cur-
rent energy and to afford protection against inductively induced poten- tials, RC networks are made with a high degree of voltage withstand strength, are non-inductive to ensure a high degree of protection against pulse potentials, and are packaged in cases that meet or exceed the flam- mability requirements of UL 94 V-0.
With an Electrocube RC net-
work substitution box, the operator selects and matches various combi- nations of resistors and capacitors to optimize spike reduction and reduce EMI levels. Once the combination is determined, Electrocube RC net- works reference codes provide the proper RC networks device based on
RC value results. Contact: New Yorker Electronics Co., Inc., 209 Industrial Parkway,
Northvale, NJ 07647 % 201-750-1171 fax: 201-750-1174 E-mail:
sales@newyorkerelectronics.com Web:
www.newyorkerelectronics.com
Page 67
Electrocube resistor-capacitor circuits.
stantially minimize the occurrence of arcing and noise generations in relay and switch contacts. Available in single-phase resis-
tors, single-phase heavy-duty RC fil- ters, three-phase resistor-capacitors and three-phase heavy duty RC net- works, they are made from dielectric material to deliver maximum
Mentor Intros Valor NPI Automated Solution
Wilsonville, OR — The new Valor® NPI release from Mentor has been designed to provide an automated PCB design-for-manufacturing (DFM) flow, replacing manual, error-prone processes. Using the solution, DFM rules set up time can be reduced from weeks to days. Based on the Valor NPI technol-
ogy, critical design data is automati- cally extracted to derive PCB technol- ogy classifications for appropriate manufacturing process constraints. The new Valor NPI application democ- ratizes DFM by offering ease of use to PCB designers without having to become DFM subject-matter experts. Valor NPI DFM technology
automates printed circuit board (PCB) design reviews based on the PCB technology and manufacturing processes employed. With the in - creasing complexity of PCB technolo- gy and the more varied manufactur- ing processes required for today’s electronics, there is a greater burden put on manufacturers to create use- ful DFM rules. Valor NPI software seamlessly
connects PCB design, fabrication, assembly, and test processes. The Valor NPI application automatically extracts relevant PCB design tech- nology from the design data to deter- mine the correct PCB technology classification. The Valor NPI tool then maps the PCB classification to the constraints associated with the
applicable manufacturing processes. Contact: Mentor, a Siemens
Business, 8005 SW Boeckman Road,
Wilsonville, OR 97070 % 503-685-7000 E-mail:
sales_info@mentor.com Web:
www.mentor.com
@
www.spea.com
FLYING PROBE TESTER
FASTEST & MOST ACCURATE Granite chassis eliminates vibrations
LOW COST OF TEST
FULL TEST CAPABILITIES
NEW
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84