VINYL & SAFETY FLOORING
A PERFECT FIT
F. Ball delivers building blocks for success at LEGO Stores.
Pauls Flooring, based in Basildon, used products from F. Ball and Co. Ltd. to achieve the high standards of flooring installation required for fit-outs of 15 LEGO stores in the UK and Europe, including recent projects in Copenhagen and Sheffield.
Flooring contractors followed similar processes in the stores, beginning by mechanically removing old floorcoverings and smoothing compounds to achieve a sound, smooth and dust- free surface ready to receive subfloor preparation products.
The main challenge involved addressing significant sloping floors in retail areas, which required building up floors by as much as 50mm to create a flat, level surface for product displays. This was achieved by priming with F. Ball’s Stopgap P131 general- purpose primer before applying the company’s Stopgap 600 deep section base compound.
While most smoothing compounds can be applied up to a maximum thickness of 20mm, Stopgap 600 can be applied at thicknesses between 5–75mm and cures to chemically bind
38
the water in the product to allow it to be capped with a suitable Stopgap smoothing compound after just three hours.
Ceramic tiles were installed throughout the shop fronts.
Contractors applied Stopgap 300 heavy-duty smoothing compound and wearing surface, in high-traffic, back-of-house areas before using F. Ball’s Styccobond F44 vinyl adhesive to install Polyflor vinyl safety flooring.
Stopgap 300 offers excellent self-levelling properties, as well as high compressive strength, which enable it to withstand high levels of foot traffic and heavy, wheeled loads.
Styccobond F44 is a solvent-free, acrylic emulsion adhesive, which provides high bond strength, strong initial tack and a long open time. It is protected against bio-degradation and suitable for securing a wide range of vinyl sheet and tile floorcoverings, rubber floorcoverings and some PVC or polyurethane-backed textile floorcoverings.
Paul Lynch, managing director at Pauls Flooring, said: “We used F. Ball products for all of the LEGO stores where we were commissioned to install floorcoverings as they are our go-to choices, and we knew we could rely on them to deliver. Achieving consistent floor levels, often to tight deadlines, would have been impossible without Stopgap 600.”
www.f-ball.com
www.tomorrowscontractfloors.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48