search.noResults

search.searching

saml.title
dataCollection.invalidEmail
note.createNoteMessage

search.noResults

search.searching

orderForm.title

orderForm.productCode
orderForm.description
orderForm.quantity
orderForm.itemPrice
orderForm.price
orderForm.totalPrice
orderForm.deliveryDetails.billingAddress
orderForm.deliveryDetails.deliveryAddress
orderForm.noItems
OFFICE & WORKPLACE


WORKING OVER FLEXIBLE SUBFLOORS


F. Ball shares guidance on preparing metal and wood subfloors ahead of the installation of floorcoverings, including choosing the right smoothing compound.


Preformed subfloors, such as metal and plywood, can move slightly when subject to normal foot traffic. For this reason, specialist smoothing compounds, which are better able to accommodate these movements, have been developed for creating a suitable base for the receipt of floorcoverings when working over these kinds of subfloor.


The choice of floorcovering and the condition of the in-situ subfloor will determine the requirement for a smoothing compound or a finishing compound, and contractors need to follow best practice when preparing the subfloor beforehand.


PRIOR PREPARATION


The first step in any flooring installation should be to ensure that the subfloor is suitably sound and smooth before commencing work.


In the case of preformed subfloors, this means ensuring that plywood overlays are securely screw-fixed to substrates at regular intervals in accordance with the British Standards.


Joints should be effectively supported to prevent any vertical displacement when loaded. Where flooring installations are part of a refurbishment, old adhesive residues should also be removed, or boards replaced.


FILLING IN THE GAPS – FINISHING COMPOUND


Where subfloors are made up of panels, in the case of raised access floors, for example, it will be necessary to fill the gaps between them, as well as holes caused by screws used to affix wood panels to the substrate so that they do not transfer to imperfections in the appearance of the finished installation.


Floor finishing compounds, such as F. Ball’s Stopgap Micro Rapid, can be applied to a seamless micro feathered edge to fill indentations formed by screws used to secure plywood and hardboard sheets. Stopgap Micro Rapid will also fill in gaps and take out any minor discrepancies where boards meet. The ultra- smooth, flexible, rapid-drying floor finishing compound creates a flawless subfloor finish, where a smoothing compound is not required. It is walk-on hard and ready to receive new


22


www.tomorrowscontractfloors.co.uk


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48