FEATURE MOISTURE MATTERS
Jason Wright at Wagner Meters discusses how moisture testing before, during and after installation protects hardwood floors.
Moisture monitoring is a continuous process throughout a flooring job. What might feel like extra work upfront can streamline your workflow and protect your business from customer callbacks.
BEFORE INSTALLATION
Moisture monitoring starts long before the first board is laid down. It ensures the subfloor and floorboards have reached an appropriate moisture level and won’t cause any damage or warping in the flooring.
For concrete subfloors, this means using reliable concrete testing devices like our relative humidity in-situ probes, the Rapid RH L6. For wooden subfloors, you’ll need a high-quality wood moisture meter like our Orion 950.
If you install the floorcovering over a subfloor that’s still holding some excess moisture, this could cause flooring problems like warping and adhesive failure. You’ll run into the same issues if you install floorboards before they’ve acclimatised to their new environment.
Some installers assume letting the flooring acclimatise for two or three days is sufficient time. But unless you verify acclimatisation with your trusted wood moisture meter, you won’t know for sure if the wood is close enough to the Equilibrium Moisture Content (EMC).
Different flooring materials and different types of wood dry at varying rates. You can’t rely on guesswork here. Moisture readings must be the guide to your decisions. Once the floorcovering is less than 2% away from the EMC, it’s ready for installation.
The Orion 950 makes pre-installation checks fast and simple. Its pinless design allows you to get moisture readings at the touch of a button. It even comes with a built-in EMC calculator.
DURING INSTALLATION
It’s important to keep up with moisture monitoring even while you’re installing the floors.
If someone at the jobsite opens a window or turns on a heater, it could ruin all the hard work you did to get the flooring adjusted to the temperature and humidity of its environment – with you none the wiser until the floorboards shrink or expand and mess up your otherwise flawless work.
That’s why you want to regularly test your floorboards for any variation in moisture content during the installation process.
But instead of this feeling like a chore, the Orion 950’s simple controls and lightweight design make frequent moisture checks a breeze. There’s no reason not to test as many times as you want. It can even be paired with an app, allowing you to safely store the moisture readings so you can track any changes or look for patterns, or in case clients want to double-check your work.
34
The more you test, the safer you’ll be from unexpected moisture issues that could lead to flooring failure, lost revenue, or a damaged reputation.
AFTER INSTALLATION
Just as there are a lot of things that can sneak up on you during installation, several things can go wrong after you leave the jobsite – leaks, seasonal changes, HVAC issues, and so on. These are things customers might blame you for even when they weren’t your fault.
This is where post-installation moisture monitoring is like insurance.
It would be impractical to visit old jobsites to periodically check the floors’ moisture content. Fortunately, there’s a device that can do that for you.
Wagner Meters’ Floor Sentry is an embedded wood floor data logger. It fits under the floorboards and monitors the ambient conditions of the floor and subfloor while you’re away. It can send its data to an app on your phone, where it can store moisture data and alert you if readings go outside of parameters you set.
This device can help clients identify and address moisture issues before they cause real damage. And its secure data records will have the added benefit of protecting you from finger-pointing, because they’ll show you weren’t responsible for moisture- related issues.
LEARN MORE ABOUT MOISTURE MONITORING
Thorough moisture monitoring involves preparing your floors for acclimatisation checking them during installation, and keeping an eye on them long after you’ve left the jobsite.
Visit
WagnerMeters.com for more information on how Orion Moisture Meters and Floor Sentry can safeguard your work and your reputation with accurate, user-friendly moisture monitoring.
www.wagnermeters.com
www.tomorrowscontractfloors.co.uk
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48