PERFECT PREPARATION F. Ball provides a durable subfloor solution for an iconic local landmark.
A range of high- performance floor preparation products from F. Ball and Co. Ltd. have been used to create a durable, professional floor finish at St. John’s Hall in Penzance, Cornwall, as part of a major refurbishment project. Contractors from Aztek Interiors used Stopgap F77 accelerated waterproof surface membrane, Stopgap P131 primer, Stopgap 600 Base deep section compound and Stopgap 1200 Pro smoothing underlayment to create a perfectly smooth surface for the installation of new carpet floorcoverings.
Aztek Interiors were contracted to complete the flooring installation, which saw all four floors of the iconic local landmark being renovated. The building is the oldest granite building in the country, and has acted as a local government office for many years.
As the existing floors were installed in the mid-19th Century, there was no structural damp proof membrane in place. With the help of F. Ball representatives, contractors conducted relative humidity tests before applying Stopgap F77 waterproof surface membrane to protect the installation against moisture damage.
Stopgap F77 is a solvent-free, high-performance, two-part epoxy resin system which cures to provide a waterproof surface membrane, capable of impeding the passage of rising damp where relative humidity values are up to 98%.
In one area of the ground floor, contractors found the existing sand:cement screed subfloor to be in very poor condition, with varying depths and a rough surface. Contractors prepared
32 | PUBLIC SECTOR
the subfloor, removing all loose material, before applying Stopgap F77. Stopgap 600 Base deep section compound was then applied to quickly raise floor levels and to provide a sound base for the application of a finishing smoothing underlayment. Stopgap 600 Base was applied at an average thickness of 45mm in a single application.
Commenting on the use of Stopgap 600, John Hudson, Owner of Aztek Interiors and an F. Ball loyalty card holder, said: “The product itself was superb. We were able to build the floor levels up a lot in one application, it flows nicely, and it sets quickly. It’s perfect for jobs like this.”
Stopgap 600 Base is a fast-drying, low-odour, deep section compound, designed for use where floor levels need to be raised quickly and economically in light to heavy-duty applications. It is suitable up to thicknesses of 5 – 50mm in a single application, and can be hand or pump applied. It has a working time of 20 minutes, and can be ready to receive smoothing underlayments from just three hours. This compares favourably to the use of sand:cement screeds, which normally take at least one day to dry per millimetre thickness.
Stopgap 1200 Pro was then applied directly onto Stopgap 600 Base, creating a perfectly smooth surface ready for the installation of new floorcoverings. Stopgap 1200 Pro is a fast drying, self-smoothing, easy to use smoothing underlayment that can be ready to receive floorcoverings from four hours.
www.f-ball.co.uk www.tomorrowscontractfloors.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64