F. BALL ACHIEVES FI Products from F. Ball have enabled a fast turnar
Plymouth College of Art
PLYMOUTH COLLEGE OF ART High performance floor preparation products and adhesives from F. Ball and Co. Ltd. have been used to transform Tavistock Place, the main undergraduate building at Plymouth College of Art, into an inspiring learning space.
The refurbishment took place during the summer break, meaning a quick turnaround to upgrade the campus gateway for staff and students was required before the new academic year commenced. Specialist F. Ball products enabled contractors to install safety vinyl sheet and carpet tiles, using Styccobond F49 pressure sensitive adhesive and Styccobond F41 tackifier, respectively, in the independent art school’s reception, gallery, café bar, offices, and conference rooms.
Having removed existing wood block, vinyl sheet, and ceramic tile floorcoverings, contractors from Lang & Potter Flooring were faced with clear signs of damp, a sand/cement screed in a poor condition, and a number of uneven subfloors which required levelling.
Once adhesive residues were removed by mechanical means and the subfloor primed, the issues were resolved using Stopgap 1200 Pro levelling compound to patch fill holes up to 18mm depth. The product was also combined with Stopgap Aggregate to fill deeper spaces created by the removal of internal walls. Finally, a topcoat of the levelling compound applied throughout the entire ground floor produced a perfectly smooth base for the subsequent application of other subfloor preparation products.
30 | EDUCATION
Stopgap 1200 Pro levelling compound was selected for its moisture tolerant properties; it can be used to patch and level uneven subfloors prior to the application of a waterproof surface membrane and prevent it from pooling in undulations on the surface. A very rough surface requires a greater quantity of product to achieve full coverage, as well as an extended curing period, both of which add time and expense to a project.
Once the levelling compound had cured, F. Ball’s Stopgap F77 waterproof surface membrane was applied throughout the ground floor. Stopgap F77 cures in as little as three hours with a single coat application to create a barrier against excess subfloor moisture attacking subsequently applied adhesives, where RH levels are up to 98%.
Following a further application of primer and levelling compound, Burmatex Tivoli carpet tiles were affixed in offices and conference rooms using Styccobond F41 carpet tile tackifier. The fast-drying adhesive is designed to provide a permanently tacky film, preventing loose-lay carpet tiles from moving under normal foot traffic, but enabling individual tiles to be lifted and replaced easily in the future, when worn or damaged.
In the café’s kitchen, Styccobond F49 Hybrid PS was used to secure Altro Stronghold 30 slip-resistant vinyl. The pressure sensitive adhesive delivers instant grab and extended open time whilst providing an extremely strong water-resistant bond, making it a suitable choice for use in the kitchen, which
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48
