Anton Paar Launches Next-Generation TAG and Abel Flash Point Testers
With Anton Paar’s latest TAG (TAG 500 and TAG 300) and Abel (ABA 500 and ABA 300) flash-point testers, users can easily determine the flash point for samples like jet fuels, solvents, flavors and fragrances, and chemicals. Patented design, flexible operation
These new instruments come with an electric igniter that lasts 10x longer than comparable igniters, meaning users can eliminate costly downtimes and high running costs. Anton Paar’s TAG/ABA 500 series flash point testers have a unique 2-in-1 cooling system so they can be operated with and without an external chiller. This feature ensures flexible operation within a -35 °C to +130 °C sample temperature range.
Efficient and safe
Efficiency takes center stage with these instruments as well. Wetted parts can be dissembled in seconds. Moreover, the devices are easy to clean, which ensures sample is not carried over. With their fail-safe fire detection system as well as a built-in fire extinguisher, operators can be sure they stay safe while working in the lab.
Full connectivity These TAG and Abel flash-point testers can be connected to AP Connect, Anton Paar’s lab execution software, and can be set up for automated email notifications or LIMS export as needed.
FAM ILS tested
Anton Paar participated in the FAM ILS Testing Program 2023 to test the jet fuel samples 885 and 886 with the ABA 500 and achieved top results. The given standard was ISO 13736 / IP 170, covering the flash point determination of combustible liquids having flash points between -30 °C and +75 °C.
More information online:
ilmt.co/PL/6qM8 For More Info, email:
email:
Anton Paar’s Portfolio of Density Measurement, Ideal
for the Petrochemical Industry
For More Info, email: email:
For More Info, email: email:
Anton Paar’s Magnetic Particle Trap: The Smart Solution for the Analysis of In-Service Oil
Anton Paar has released a magnetic particle trap (MPT) for users performing in-service oil condition monitoring (OCM).
The MPT is available for Anton Paar’s SVM 1001, 2001, 3001, 4001, and there are also special versions compatible with Xsample 530 or 630 for fully automated OCM. The MPT accessory for Anton Paar’s viscometers removes ferromagnetic particles before the sample reaches the SVM measuring cells, which lets users get accurate used oil analysis results. The MPT is mounted directly on the instrument, which saves users lab space. And its electrical heating decreases the sample’s viscosity to optimize filtration efficiency.
Anton Paar’s density measurement portfolio is the right choice for density analysis throughout the entire process. Anton Paar’s solutions provide automated filling and rinsing of samples, safeguard analysis quality, increase lab efficiency, and eliminate operator influence.
Ideal for the petrochemical industry, Anton Paar’s density measurement instruments – from its portable DMA 35 to its DMA 4200 M – provide complete solutions for the analysis of petrochemical products.
These instruments support customers working in fuel and lubricant trade who conduct quick checks of incoming product. They also help with high-throughput analysis in an automated system as well the analysis of bituminous samples at high pressures and temperatures.
Moreover, user data can be transferred digitally via AP Connect, Anton Paar’s lab execution software. This ensures petrochemical customers can seamlessly trade and characterize their products.
More information online:
ilmt.co/PL/be3d 61359pr@reply-direct.com
For More Info, email: email:
For More Info, email: email:
For More Info, email: email:
More information online:
ilmt.co/PL/OpXq For More Info, email:
email: New SVM 1101 Simple Fill from Anton Paar
For More Info, email: email:
For More Info, email: email:
Anton Paar, a global leader in laboratory and process measurement technology, is proud to announce the launch of its latest breakthrough product, the SVM 1101 Simple Fill.
This multiparameter instrument measures density in compliance with ASTM D4052/ISO 12185 and kinematic viscosity at any freely selectable temperature between 15 °C and 100 °C. SVM 1101 Simple Fill conducts measurements in under three minutes and uses only 75 W of power.
Moreover, FillingCheck™ prevents filling errors of the density cell. Since the SVM 1101 Simple Fill can also run on batteries, is lightweight (6.5 kg), and easy to handle, users can enjoy maximum flexibility with the instrument.
www.anton-paar.com
More information online:
ilmt.co/PL/k85y For More Info, email:
email: For More Info, email:
61362pr@reply-direct.com
61358pr@reply-direct.com
61360pr@reply-direct.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44
