PROJECT MAKING ACCESSORIES 73
Woodturner’s 3 Jaw Micro Chuck Ideal for holding small projects
It’s self centering and step jaws reverse for extra versatility. Its small diameter keeps your knuckles away from the jaws when working close to the chuck.Weighs only 1.2 lbs, 2" dia. Holds work from 3/4" to 2-1/2" inside, and up to 1" outside. Standard thread of 1" x 8tpi and includes a 3/4" x 16tpi adapter.
LCM18X 3 Jaw Micro Chuck............................$ 89.95
PSI Collet Chucking System with 5 Collets Precision gripping and centering of small diameter dowels and tenons
Ideal for gripping pen mandrels, bottle stoppers and other small projects where a tenon is used for chucking.Easily hand tightens to secure collet and workpiece. Compatible with 1" x 8tpi headstock threads. System includes: 1" x 8tpi spindle adapter, with collet closing head, 5 collets: 1/4", 3/8", 1/2", 5/8" and 3/4"and ll in blow-molded carry case. Will adapt to any lathe with PSI headstock adapters.
LCDOWEL 5 Collet Chucking System
......................................UPS $10, $ 89.95/set
Large Dedicated Pen Blank Drilling Chuck (2-1/2” capacity) Features a reversible set of jaws that enables drilling blanks up to 2-1/2” square and 5” long
With two and a half times the capacity of our Original Dedicated Pen Blank Drilling chuck, this large capacity chuck will let you drill through the exact center of bottle stopper blanks,project handles and more. Use the standard jaw position to drill from 1/4" to 1-1/2" square – reverse the jaws to drill from 1-1/2" to 2-1/2" square.Weighs only 2 lbs,has a 1" x 8tpi thread. Includes 2 tommy bars to open and close.
CSCPENCHK2 Dedicated Pen Blank Drilling Chuck ........................................................................ $
Corner-B-Gone Pen Blank Rounding Jig Save time and effort with this unique precision engineered jig
The Corner-B-Gone jig is a simple yet elegant solution for knocking off the corners of your turning blank. Get a head start on turning your blank round on the lathe. It can be used in 2 configurations to remove the edges. In the Bandsaw configuration, simply mount your blank between the metal blocks then slide the blank edges through the blade, turn the assembly to the next position, after 4 turns in less than a minute, your blank will be ready to turn. In the Disc Sander configuration, position the blank between the blocks and press each edge into the disc to round the corners.We engineered a quick release threaded knob to enable you to quickly secure, assemble and disassemble your blank for
machining.The jig can hold
PKCBJIG ..........................$ 24.95
blanks or blank combinations up to 8in. long and 1in. square. System includes a quick release knob, 2 multi purpose blocks,8 bushings and a 12in. threaded shaft.
System Includes: • Quick release knob • 8 Bushings . . .
BANDSAW SOLUTION 104.95
Live Tailstock Chuck Adapter
Allows precision centering of spindles or dowels at the
tailstock end
Ideal for mounting bowls for hollowing; after turning the outside of the bowl blank, turn a tenon on the bowl
bottom.Then mount your chuck to the tailstock using the adapter; grabbing the tenon with the chuck while still attached to the faceplate.When the chuck and blank is remounted on the headstock, your bowl will be perfectly centered.
SANDING SOLUTION ...
• 2 Multi purpose blocks • 12" Threaded Shaft
LTCA18 1" x 8tpi mount and #2MT shaft ......................$
36.95
2-3/8" Replacement Jaws Ideal for large bowls
For 1-3/8" Expanding Collet Chuck. FB238 ..................$
FOR ASSISTANCE • Call Toll Free: 1-800-847-8984 • E-Mail:
pam@pennstateind.com or
www.psischools.com 21.95
Dedicated Pen Blank Drilling Chuck Guaranteed to deliver perfectly centered pen blank
The chuck includes two 2" jaws that will hold your blanks perfectly centered at the headstock. To drill a perfectly centered hole, just mount a drill chuck in your tailstock with your drill bit and advance the drill into your blank as it spins on your lathe. Vary the headstock speed to accommodate your blank and bit. Accommodates blanks up to 1" Square.
Jaws are 2" long, Chuck has a 1" x 8tpi thread, 2-1/2" diameter weighs only 1.0 lb, operated by 2 tommy bars (included).
LA3418X
CSCPENCHK Pen Blank Drilling Chuck ............................$ Internal adapter, 1" x 8tpi to 3/4 x 16tpi ......$
89.95 9.95
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
