12 PEN MANDRELS PEN MANDRELS


Makes it easy for your students to mount the wood or acrylic blanks onto the lathe for turning


• All of our turning sets are made on the same 7mm mandrel • INCLUDED IN LATHE STARTER SETS


All Mandrel Sets: All PSI mandrel kits include headstock attachment,mandrel shaft,a 7mm drill bit,7mm bushings, and a knurled nut. Mandrel O.D. = 0.243"


PSI Maxi-Mandrel: This mandrel features a 7mm mandrel shaft that slides through a headstock collet.This feature guarantees a perfectly concentric pen.The mandrel easily adapts to different length projects. Simply mount your tubes and bushings then slide the shaft to the appropriate length and lock it in place.The shorter shaft reduces the likelihood of the mandrel shaft bowing.The collet is tightened with two 7/8" wrenches (sold below).


Keyless Pen Mandrel: The quickest & most convenient pen mandrel on the market. Allows you to instantly hand loosen and tighten the collet that secures the 7mm mandrel shaft.Allows you to quickly slide and lock the shaft to adapt for the exact length of your turning –no more need for spacer bushings.Avoids the need for separate tightening wrenches and guarantees a perfectly concentric fit. Includes 5 bushing and 2 tommy bars.


A PKM-AL B PKM-BL C PKM-CL


D PKM-DL E PKM-ELC F PKM-FLC


PKMWR


Standard Mandrel (Carba-Tec® Standard Mandrel (Commander™ Standard Mandrel (Shopsmith®


, Sears® ,Jet®


) Thread on 3/4" x 16tpi - Screw on ........................................................................$ , TurnCrafter Pro™) Thread on 1"x 8tpi - Screw on ..............................................................$ ) Slip on 5/8", No Thread - Slip on ....................................................................................................................$


, Record® , Delta®


, Ryobi®


XPKM-ELC2 Replacement mandrel shaft for the Standard-Mandrel styles A,B & C ..............................................................................................................$ Standard Mandrel (For Any Lathe) Drill Chuck Mandrel w/straight shaft - use with TM-22 or TM-32 ............................................................$ Maxi-Mandrel (Carba-Tec® Maxi-Mandrel (Commander™


, TurnCrafter Plus™, Ryobi® ,Jet®


, Delta®


) #1 Morse Taper Maxi-Mandrel ............................................................................$ , TurnCrafter Pro™) #2 Morse Taper Maxi-Mandrel..................................................................$


Styles A,B, C,D includes 7 bushings 


Note: Lathes use the same mandrel for all projects. Only the bushing needs to change for each kit.


Styles E, F includes 5 bushings variable length  





Styles G, H includes 5 bushings and tightening bars


Any mandrel is 1/2 price when purchased with Starter Set 1 on page 6!


XPKM-ELC Replacement mandrel shaft for the Maxi-Mandrel styles E & F............................................................................................................................$ Open 7/8" wrenches to close collet on Maxi-Mandrel ......................................................................................................................................$ G PKM-FSM #2 Morse Taper Keyless Pen Mandrel ..........................................................................................................................Orginally $29.95 SALE $21.95


The “Grabber”


Closed End Pen Mandrel System for 7mm and 8mm projects


Now you can easily turn natural “closed ends”on any 7mm or 8mm pen or project.With our amazingly simple Closed End Pen Mandrel system you can turn a barrel of any length.The patent pending design is so advanced but simple. Simply twist the mandrel nut and the silicone rubber on the mandrel expands to to “grab” the project tube internally.The silicone locks and supports the tube as you turn the end. Turn closed ends on pen kits, keychains, bottle openers,and more. System includes Mandrel MT headstock mount and extra silicone tubing.


PKMBL72 The Grabber for #2 headstock threads .......................... $ PKMBLTU Replacement silicone tubing 12" ...................................... $


Turn Between Centers Mandrel System Ideal for single tube


Turn more accurate, consistent and concentric pen barrels with this one of a kind mandrel system. The system includes an MT headstock insert and live MT tailstock insert - each with 7mm pins (similar to a 7mm mandrel shaft).Mount your bushings onto the pins,mount your pen blank, then bring the tailstock forward to secure your blank between centers.


PKMBCM1 #1 Morse Taper Mandrel System........................................$ PKMBCM2 #2 Morse Taper Mandrel System........................................$ PKMBCM3 Shopsmith Sys. for drill chuck headstock insert sys. ....$


29.95 29.95 29.95


24.95 4.95


The Mandrel Saver


Live Tailstock Center Use this Fail-Safe devise to preserve your mandrel


Mandrels usually bend when you tighten the tailstock center point into the end indentation of your mandrel. This system solves that problem because your mandrel shaft passes through this hollow live center.Your bushings press against the center with zero pressure on the mandrel shaft.The tube and bushing assembly tightens up by turning your tailstock quill adjustment wheel.No need for extra spacer bushing: The system adapts to your project’s length.No need for the knurled nut that sometimes gets lost, misplaced or stripped.Works with all PSI mandrels and adapts to nearly every mandrel on the market with a shaft of .245" or smaller. PKMSTS1 #1 MT Mandrel Saver ....................................................$ PKMSTS2 #2 MT Mandrel Saver ......................................................$


18.95 18.95


 Basic Mandrel  Mandrel Saver Tailstock Center Basic Mandrel For use with Mandrel Saver Tailstock Center


Includes three 7mm bushings- does not include knurled nut, drill bit or indent shaft end.The ideal replacement mandrel if you’re using the Mandrel Saver Tailstock Center PKMSMAN1 #1 MT Basic Mandrel ......................................................$ PKMSMAN2 #2 MT Basic Mandrel ....................................................$


16.95 16.95


+ Mandrel Saver Package Includes a Mandrel Saver Tailstock Center, Basic Mandrel,3 7mm bushings and FREE 7mm drill bit.Here’s a complete mandrel system for just a bit more than the cost of a new standard mandrel. PKMS1SET #1 MT Mandrel Saver Package.................................... $ PKMS2SET #2 MT Mandrel Saver Package ....................................$


17.95 17.95 17.95 12.50 12.50 17.95 17.95 7.75 5.95


32.95 32.95


TO ORDER • Call: 1-800-858-9295 • Fax with PO: 215-676-3716 • E-Mail with PO: maria.schools@pennstateind.com


Silicone expands to Grab the tube


Twist the nut to expand silicone


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88