72 PROJECT MAKING ACCESSORIES
CSCBARR4 Specifications Body Weight
Standard Thread Body Diameter
8 lbs
1-1/2" x 8tpi 4-1/2"
Jumbo Jaws (External Grip)* 4" to 10" Woodworm Screw Chuck Included Holds Round/Square Stock
Yes * Sold Separately #3 WIDE JAWS PIN JAWS #2 ROUND JAWS (pre-mounted)
Barracuda4 Powergrip Key Chuck 9-piece heavy-duty lathe chuck system for large lathes Good for full size lathes of 1-1/2 HP or more
Use on lathes with 10" swings and larger - use it for your heaviest and largest turnings. Its geared key mechanism provides a powerful grip capable of holding large diameter
work.The “T”handled key allows
single hand tightening with a long shaft that clears larger diameter work. The Barracuda4 Powergrip Chuck comes with many extras including; #1 step jaws, #2 round jaws (pre-mounted), #3 round jaws, pin jaws, a screw chuck, long shaft chuck key, a “T” handled allen wrench and a wooden carrying case. The chuck comes standard with a 1-1/2" x 8 tpi mount. Headstock adapters are available for other lathes.Weight is 8lbs with a large 4-1/2" diameter chuck body.
JUMBO FLAT JAWS (not included)
CSCBARR4 #1 STEP JAWS SCREW CHUCK
SPINDLE ADAPTER (not included)
LABAR418 Spindle Adapter to 1" x 8tpi..............................$ 16.95
Barracuda4 System with 1-1/2" x 8tpi thread
..................UPS $11, $ Includes chuck key, Allen wrench & 8 jaw screws
199.95
Jumbo Flat Jaws for Barracuda4 - Ideal for finishing the bottom of bowls. Includes 8 rubber grips. Opens to grip bowls from 4" to 10" internally (This is not a “C” series chuck). Compatible with lathes with 12" swings and larger.
BARR4FJ3
............................................................................................UPS $10, $ 4 sets of jaws included
From To
#2 Jaws (External Grip) 1-3/4" 3-11/16" (Internal Grip)
2-3/8" 4-1/2"
#3 Wide Jaws (External Grip) 3-11/16" 5-9/16" (Internal Grip)
4-3/8" 6-1/2"
Pin Jaws (External Grip) (Internal Grip)
From 1/4"
39.95
To 2"
1-1/8" 2-7/16"
#1 Step Jaws (Internal step 1) 3/16" 2-1/4’ (Internal step 2) 15/16"
3"
Barraccuda 52 Insta-Change Jaw Chuck System The Only Chuck You‘ll Ever Need!
Benefits and features abound: • More than just a chuck, it is an entire system that enables you to turn every thing from spindles to bowls with unapparelled gripping power.
• Faster and easier than traditional set screws; Just snap jaws on with a secure mount and pop them
off.Remove and replace all four jaws in less than a minute.
• Eliminates the Allen wrench and dealing with loose, lost or stripped screws. • Change jaws ON the Lathe,whereas the screw style is off the lathe. • Ideal for mini, midi and full-sized woodworking lathes. • Industrial-grade finish that will last for decades. • The direct-drive, gear-tooth jaw tightening T handle allows for a one-handed tightening operation to secure the workpiece to the chuck.
• The chuck,with a 4-1/2in. diameter and enclosed-back,weighs in at only 4.25 pounds • Vibration-free and Standard 1in. x 8tpi mount (Not recommended for bowls larger than12in. dia.)
ACCESSORIES FOR CSCBARR52: Insta-Change Super Jaws
Holds bowls to 8-1/4"
diameter.Makes quick and easy work out of finishing bowl bottoms and is ideal for polishing and finishing.
Includes:Mounting adapter for quick installation and removal. 8 pins 1/2" long and 8 pins 3/4"
long.Closes over 3" round or larger. CJAWXL52 Insta-Change Super Jaws.......................... $
39.95
Replacement Jaws for all “C” style chucks CJAWFJ1 Small Flat Jaws $
CJAWFJ2 Jumbo Flat Jaws $
• This inclusive package includes 2 sets of jaws including: pen blank drilling jaws, #2 jaws, rock-solid grip on nearly any turning
project.Also, includes a Woodworm screw chuck, indexing back- plate, blow-molded carrying case, gear tooth jaw tightening key and jaw removal tool.
CSCBARR52 Insta-Change Jaw Chuck System ............$ 199.95
Combo of 4 Jaws CSC5LJAWS
..UPS $12
Only $
A #3 Bowl Jaws 3.5" O.D. 3" I.D. CSCBARB $
29.95
B Pin Jaws 1" O.D. 1" Long CSCBARP $
32.95 Small Flat Jaws open to 5" 36.95 Jumbo Flat Jaws open to 7-3/4"
1-3/8” Expanding Collet Chuck
Mount pocket watch blanks or small bowls with this double duty chuck
“C” Series Pin Jaws
Ideal for
vases.Grips inside a hole bored 1" to 2-1/4". Extension provides optimum grip
CJAWPIN Pin Jaws........................$ 21.95
As a Collet Chuck - Drill a 1-3/8" hole about 3/8" deep into your work (the diameter of most mini-clock fit-ups.) Insert the chuck and twist it - expanding the jaws up to 1/8" for a firm inside grip. Allows your work to be removed and remounted with no loss of concentricity. Converts to a Screw Chuck - Simply remove the collet jaws and screw in the supplied screw center. FREE with purchase! 1-3/8" Forstner Bit! A $12 Value
CXC4 1" x 8 tpi spindles ..................................................$ 29.95 TO ORDER • Call: 1-800-858-9295 • Fax with PO: 215-676-3716 • E-Mail with PO:
maria.schools@
pennstateind.com 106.80 29.95
C Step Jaws .6" O.D.– Narrow Step 1.4" O.D.– Wide Step CSCBARS $
26.95
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
