DECOMMISSIONING & ABANDONMENT Universal Subsea Inc. Sets Global Best Practices
Milestone for Subsea Well Abandonment Universal Subsea Inc. (USI) announced that its patent-pending Defender subsea isolation cap was successfully installed to the Bulleit subsea well, operated by Talos Energy (Talos) in the Gulf of Mexico at a water depth of 1,300 feet. The lightweight, thermoplastic cap was landed, locked and securely sealed to the wellhead in Green Canyon Block 21 using a remotely operated vehicle (ROV) after deployment via wireline from the Noble Don Taylor drillship. The isolation cap and subsea wellhead were injected with USI’s proprietary, nontoxic, biodegradable Defender Stasis LT subsea equipment preservation fluid. The revolutionary, low-pressure isolation cap design ensured that seawater was completely purged from the wellhead bore and external chambers and replaced with the long-lasting preservation fluid.
USI – Isolation Cap – ROV Image
“We are grateful to Talos for partnering with us to set a global best practices milestone for protection of subsea wellheads during well abandonments,” stated John Fitzgerald, Director of Sales and Marketing, Universal Subsea Inc. “Defender is the only ROV-installable protector cap that provides positive locking and reliable sealing to the wellhead mandrel. It is also the only cap of any size or rating that allows all seawater to be completely removed from the internal and external protection zones. The wellhead bore, ring gasket profile and external connector profile are completely isolated from the subsea environment and immersed in non-electrolytic preservation fluid to protect against deterioration.”
The drilling program for the Talos-operated Bulleit well called for an estimated 12-month temporary abandonment period before the subsea tree installation, and protection against corrosion and marine growth during the abandonment was considered crucial. The technical team at Talos recognized the intrinsic value of maintaining the wellhead mandrel in the “as-installed” condition during the abandonment, and eliminating the costs and schedule impacts for remedial cleaning activities prior to subsea tree installation.
The Defender subsea isolation cap used on the Bulleit well fits all subsea wellheads with a 27-inch H-4 profile. Similar models are available for other subsea wellhead profiles and subsea tree applications. Defender’s one-piece, thick wall, nonmetallic body is manufactured from a marine-grade thermoplastic that is immune to corrosion and deterioration in the subsea environment while providing a 25-plus year operating life. Metal hardware is typically 316 stainless steel.
“Universal Subsea overcame numerous engineering barriers to develop a corrosion-proof, low pressure, plastic protector cap that would lock and seal reliably in water depths from 50 feet to 11,000 feet, with multiple patents pending,” noted Sean Thomas, PE, President and Founder. “The new designs include a high capacity, damage resistant, ROV operated locking system and special body seals that we developed to allow ROV installation while providing reliable sealing performance. Defender’s dual containment zones and tertiary annular zone provide two elastomer seal barriers and two non- conductive fluid barriers between the wellhead ring gasket profile and the subsea environment. The non-electrolytic preservation fluid is a key part of the technology.”
Formulated from natural and modified bio-based oils with environmentally friendly additives, Defender Stasis
46
www.sosmagazine.biz November 2019
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52
